on the driver side engine compartment above the oil filter. rough description but it gives you a general view
Yep, just look around the oil filter and you'll find it. It took me about one hour total to put my oil pressure gauge in, but most of that was just running the line for the new gauge....
-1994 Mustang GT "The Red Baron": 3.73 gears,K&N filter,GT40 tubular intake,BBK Full Length Headers,modified midpipe & Flowmaster muffs, timing at 12*. Best time- 14.74 @ 93.16 -Check profile for pics of our car collection! - AmericanMuscle ROCKS!! - "True Hot-Rods don't have valve covers!"
Where is the oil pressure sending unit on our 1995 5.0 mustangs? Thanks for the help.
Don't know about the stangs, cause I haven't looked at mine yet, but my 87 TBIRD had the same (5.0) and yes it was very near the filter. One word to the wise, on the TBIRD there was a battery ground that attached to one of the sender bolts, if the stang has it also, make sure you don't forget to reattach it. The shop did that to me and about melted the secondary ground coming off the battery.
I drink with a bunch of guys who have a Mustang problem.