1992 mustang 2.3l swap to 350 engine

92mustang2.3 · 03-10-2008

Ok I was wondering if I could put a 350 engine in my 1992 Mustang 2.3l. And if I can what do I need to do. If you got any advice please tell.

sleeper_inc · 03-11-2008

You need to either buy a new k member or mod the one you have in there.

Do a search on ls1tech (ls1 forums) and you'll find 3-5 build threads, or on mustang forums I posted in the 5.0 section a whole bunch of links

4.6StangRage · 03-15-2008

not to try to change direction on this but im sure a 351 would be about equal power and i think It would also be easier.

sleeper_inc · 03-16-2008

true, but you'll still need modifications either way...

Turbosnake · 04-24-2008

Are you talking Chevy Small Block?

jeffy67 · 04-26-2008

dont throw a bowtie engine in the car go with teh blue oval!

this would be alot of work, i mean anything can be done, 4.6stangrage is right though it is a lot less of a headache to stuff under the hood and plenty of power to leave your bowtied 350 in the dust haha, either way though dude anything can be done as long as you have the time and effort! good luck to ya!

dawaki · 04-27-2008

no chevy in fords.....no ford in chevys.....please

**EagleAutosports** · 04-27-2008

My neighbor has a Chevy 421 small block stroker and a Powerglide tranny, nitrous, and he runs 9's. He has an engine front plate to not only bolt the engine to but that also solved the k member issue. A custom crossmember and driveshaft and he's rolling so it isn't that hard to do. I just say put a Ford engine into a Ford car, no Frankenstein cars for me but if that's what you want to do, go for it.

Turbosnake · 04-28-2008

Two word 383 Stroker.

stanglover4life · 04-29-2008

my freinds selling me a 460 big block. gonna use it for a weekend car. so im gonna buy a junker stang. lol thats a good name im gonna use that and call it that.

Pedal2TheFloor · 04-29-2008

Quote:

Originally Posted by dawaki

no chevy in fords.....no ford in chevys.....please

Every one knows that it is a sin to put a Chevy in a Ford

stanglover4life · 04-29-2008

might as well buy a chevy if u gonna buy the engine

Turbosnake · 05-03-2008

If you put a 460 in a fox body mustang the things is not going to handle at all. Chevy small blocks are light and cheaper.

2003turbocobra · 05-04-2008

Quote:

Originally Posted by Turbosnake

Two word 383 Stroker.

or better yet 408w stroker

stanglover4life · 05-05-2008

well i dont plan on street racing with it. i plan on it being a dragcar. im gonna buy a junk fox body and rebuild it