what else do i need for my 2.3 turbo project??

85dangeranger · 01-03-2009

well im in the prosess of converting my carbed 2.3 turbo over to EFI, i just picked up the following parts at a junkyard today: lower intake, fuel rail, 88' TC ECM, mass air flow computer. i know i need other stuff, but what else will i need???? can someone write me up a parts list??

mg man 75 · 01-03-2009

I will try to help.
Wiring harness, with misc sensors to go with that. Can use a later 2.3 mustang harness. Get one before air bag and the ICRM. And wire in. The 87-88 turbocupe wiring harness is a nightmare. Large Vam to go with the 88 ECM. 88 did not have maf.
Fuel lines for EFI. Need two now. Wiring from computer to fuel pump in tank.
Also a later model fuel tank for modify your tank for the efi pump or external pump.
Brown fuel injectors,
turbo exhaust manifold. I am unsure of yours if can move turbo on other side and use it or it is differant.
Hoses from Vam to turbo and hose or metal tube from turbo to intake.
This link may help. TurboFord.net Forums: 2.3T swap into an 79-86 Fox mustang Write-up help needed