[bradster93lx2.3]

i need help finding a 5 lug conversion for my 93 2.3 and not too expensive somone help please (bolt pattern 5x4.5)

thanks in advance to any responses

[Cobrajet67]

SSBC sells a complete kit but it's outrageously priced as most of their stuff is. Ford Racing sells much cheaper kits. Here's a link to some-
MUSTANG, FORD - summitracing.com
All you should need are axle shafts and rotors.
Here's Ford Racing's link-
MUSTANG, FORD - summitracing.com

also-
Ford Racing Performance Parts [Brake Kits / Components]

[bradster93lx2.3]

will all that bolt up to my 2.3 car
and is there any cheaper way

[Cobrajet67]

Oh, sorry, I didn't notice you had a 4 cyl. car. No, none of that stuff will work for. you need a v8 parts car to take off the axle and complete front brakes-maybe a junkyard too.

[b_chandler]

Or you can use Ranger front rotors with Mustang bearings.

You'll need to clearance the calipers slightly, but they'll work.

It's not a brake upgrade, it's just a 5-lug swap.

[Cobrajet67]

that sounds like good advise also.

[b_chandler]

It's been working just fine for me for the last 4 years.

[J. Rhapsody]

Ranger driver side axle shafts and/or aerostar passenger side axleshafts for rear conversion. Front spindles from a SN-95.