[bradster932.3]

ok how hard would it be to go from fuel injected to carberated using a Offenhauser 4-barrel intake for 2.3s ive seen a few people talk about them on here and if it not too hard id like to have a carberated car, and for ignition can someone explain a full-on MSD ignition box,pretty much what all that is and how much of an increase i could be looking at.
Any replies would be greatly apreciated
Thanks alot,
Brad L.

[bradster932.3]

someone please reply

[NavySVO]

I am fairly sure that the head's intake bolt pattern is different.

[DBT4220]

It's not that hard you just have to find the right lower intake manifold. Other than that It will bolt up just as simple as the fuel injection. Good luck