[sawdust]

I'm thinking of ptting a hydraulic clutch in my 91 2.3l Stang. I did some research and looks like a 88-91 Ranger 2.3l came with a hydraulic clutch. So I was thinking of pull one at the local slavage yard which is less the $100.00. Has any one done this? any issues?

Thanks

[b_chandler]

The Ranger hydraulic clutch setup won't work. The transmission in the Ranger is different than the one in your Mustang. It's a shame really since it's a nice simple setup.

The one to look for came in the 87-88 Thunderbird Turbo Coupe. You'll need the master and slave cylinders as well as the bellhousing and throwout arm and the pedal assembly.

[93stangfutr5.0]

ok so that poses a question from me if i swap over to a TC motor and tranny does that mean i have to get a hydraulic clutch?

[evintho]

No. You'll just have to use the cable bellhousing. Your Mustang has one. It's a direct bolt on. The hydraulic housing is on the right. Note the mount for the slave cylinder...................

Bellhousing comparison

[turboeeyore]

what year turbocoupe has a hydrolic clutch?

[evintho]

Originally Posted by turboeeyore

what year turbocoupe has a hydrolic clutch?

'87-'88 TC only.

[turboeeyore]

if i knew that i'd have installed one in my foxbody years ago, i hate the dual cables.