[lilcobra 93lx]

Has any one swaped pedals from the newer sn95s?
I hate how close the pedals are in my 93 and want to have the pedals wider apart
Thanks Jim

[SM90Stanger]

Hey Cobra,

You wouldn't HAVE to swap pedals to fix that little issue which I also noticed especially when I accidentally hit both the brakes and clutch when I went to hit 2nd (lmao, it was kinda embarrassing and didn't work really well)...

Get a welder if you don't already have one, some 3/8" steel or whatever the guage of metal they use for pedals and fabricate away. I am sure that would be a heck of a lot easier than swapping out whole systems that might include fabrication anyways to fit in.

Steve

[TOM RENZO]

In the shop we use those fake pedal plates and spread them out on the pedals so they can be more confie. You know the ones i mean the cobra aluminum ones. They screw on to the pedals??? or you can get out the smoke wrench like steeve recommended and go to TOWN. (NOTE) either setup has to be done RIGHT. Not fun having a pedal break off the rod ASSEMBLY. :b igthumbsup

[lilcobra 93lx]

Tom I'm using a brake booster and mastercyl. from a 02 Mach 1
on mi 5 lug cobra brake conversion will my 93 brake pedal work ok?
I know I have to elongagate the mounting holes
Thanks Jim