[1990orangestang]

i have 1990 2.3 stock motor and i added a t3/t4 turbo kit and it runs great but i was curious were to hook up my boost guage

[nigel]

Welcome to the site.

[1990orangestang]

hey do you know were i should put my boost guage

[fobra559]

Welcome to AFM

[stlwagon]

Let's see if we can find answers in here.

[1990orangestang]

thanks for the warm welcome

[b_chandler]

Intake manifold, downstream of the throttle body.

[1990orangestang]

is there a specific place and how do i hook it in to the intake manifold

[93stangfutr5.0]

they have a couple of places to put it were your center vents are (if your not worried about using them) and your a pillar.

[1990orangestang]

i already have the pillar pod but i just need to know were to hook the vacum line

[TOM RENZO]

Preasure side of the manifold.

[TOM RENZO]

On the upper their is a plastic pipe that feeds the vacuum tree on the firewall. You can pick up your vacuum and boost supply their for your gauge.

[SM90Stanger]

Originally Posted by TOM RENZO

On the upper their is a plastic pipe that feeds the vacuum tree on the firewall. You can pick up your vacuum and boost supply their for your gauge.

Can it just be any open vacuum fitting? Or does it have to be on a specific side? Or the top or bottom?

Thanks, Steve

[1990orangestang]

i got it figured out works good

[TOM RENZO]

Originally Posted by SM90Stanger

Can it just be any open vacuum fitting? Or does it have to be on a specific side? Or the top or bottom?

Thanks, Steve

Any where the gauge can see vacuum and boost. Naturally it has to be on the hot side of the turbo. ( the boost side )