#1 permalink
Rookie
Joined: Jul 2009
Posts:
18
Threads:
6
Minneapolis
Minnesota
1993 Mustang 2.3 cold air intake what size cold air intake fit's 2.3 motors or do I just buy one for 5.0 motors and use a adjustable clamp. Also which brand is the most effective.
#2 permalink
Made Member
2.3L Member
Joined: Feb 2009
Posts:
692
Threads:
87
West Palm Beach
Florida
use the 5.0 tube
and K&N filter
__________________
1993 LX Notch Foxbody 2.3l Automatic,Custom 2" Cold air intake,EGR Delete,CAT Delete/straight 2.25 pipe,95' Ranger Tubular header,5.0 GT Rear Sway Bar,5.0 Fuel Pump,Monroe Gas Struts,225 60 15 tires,8 speaker sound system,400.1 mono block POWERBASS amp,2 ORION COBALT 10" subs
#3 permalink
Rookie
Joined: Jul 2009
Posts:
18
Threads:
6
Minneapolis
Minnesota
thanks for the info
How much do they cost, and will I notice any power.
#4 permalink
Made Member
2.3L Member
Joined: Feb 2009
Posts:
692
Threads:
87
West Palm Beach
Florida
Quote:
Originally Posted by
93 Hood mustang thanks for the info
How much do they cost, and will I notice any power.
Get a 2'' or 2 1/2 inch pipe and have one side slightly bent. Thats the cheapest. If you go 3" with MAF it'll run slightly poor. K&N filter is whats going to cost because it's the best filter out there for your car. Breaths real good, other cones are just as good as the filter in that air box your trying to get rid of. With K&N you will feel more of a difference than you would with a cheap cone filter, but if you want cheap get the $20 cone to stick on the end. You'll also need an $8 MAF adapter from the local parts store.
__________________
1993 LX Notch Foxbody 2.3l Automatic,Custom 2" Cold air intake,EGR Delete,CAT Delete/straight 2.25 pipe,95' Ranger Tubular header,5.0 GT Rear Sway Bar,5.0 Fuel Pump,Monroe Gas Struts,225 60 15 tires,8 speaker sound system,400.1 mono block POWERBASS amp,2 ORION COBALT 10" subs
#5 permalink
Rookie
Joined: Jul 2009
Posts:
18
Threads:
6
Minneapolis
Minnesota
Can I just buy one online If so what is the best one to buy ? Don't care about the money just want to do it right.
#6 permalink
Made Member
2.3L Member
Joined: Feb 2009
Posts:
692
Threads:
87
West Palm Beach
Florida
__________________
1993 LX Notch Foxbody 2.3l Automatic,Custom 2" Cold air intake,EGR Delete,CAT Delete/straight 2.25 pipe,95' Ranger Tubular header,5.0 GT Rear Sway Bar,5.0 Fuel Pump,Monroe Gas Struts,225 60 15 tires,8 speaker sound system,400.1 mono block POWERBASS amp,2 ORION COBALT 10" subs
#7 permalink
Rookie
Joined: Jul 2009
Posts:
18
Threads:
6
Minneapolis
Minnesota
I'm new to this so thinks alot. will need to buy rubber sleves for air sensor?
#8 permalink
Made Member
2.3L Member
Joined: Feb 2009
Posts:
692
Threads:
87
West Palm Beach
Florida
You can get a kit that comes with everything or just the pipe and piece it together. You'll pay anywhere from $40 and up on a good CAI system or you can hopefully make one cheaper.
__________________
1993 LX Notch Foxbody 2.3l Automatic,Custom 2" Cold air intake,EGR Delete,CAT Delete/straight 2.25 pipe,95' Ranger Tubular header,5.0 GT Rear Sway Bar,5.0 Fuel Pump,Monroe Gas Struts,225 60 15 tires,8 speaker sound system,400.1 mono block POWERBASS amp,2 ORION COBALT 10" subs
#9 permalink
Made Member
2.3L Member
Joined: Dec 2008
Posts:
500
Threads:
18
Canada
Manitoba
1993 Mustang 2.3 cold air intake 
and K&N filter
How much do they cost, and will I notice any power.
