[kilobyte]

hello everyone
i wanted to know if i took the rear out of a 96gt would i have alot of problems mating it to my 93 4 cyl? a friend of mine just smashed up his stang so i can get it really cheap. am i looking at more problems then it would be worth? i think it has the 3.27 gears but i do know it is a possi.

[ARdoller]

it shouldnt be too much of a problem if the donor rear is 4 lug. i would double check though. i have heard of people doing it, but im not 100% sure of how much work it was.

[kilobyte]

no it is a 5 lug rear. i wondering if i could use the same hardware with out having to change anything but just the rear and maybe some brake lines

[ARdoller]

you may have to change a few things for a 5 lug, including the front end so you dont have mismatched rims.

[kilobyte]

well i dont care right now about having 4 lug in the round and 5 in the back. i am going to swap out the front when i get some more$ with a 5 lug setup and a big brake kit. my main worrie is the drive shaft am i going to need a new one or a custom one made? am i going to have to swap out the master cyl?