changed several parts but my mustang still won't start

pmillburg · 10-22-2006

I own a 93 mustang with the 2.3L engine. it is the engine with eight spark plugs and two coil packs. I was coming home and while slowing down for a stop sign my rpms declined. When trying to take off the car staled and would not start again. I have changed the spark plugs,wires,coil packs, and cleaned out the fuel filter. I can hear the fuel pump kick in after turning the key. The car will turn over but won't start. HELP!! I have also chicked all gounds and they all check out fine.

spy23714 · 10-22-2006

Have you checked the starter and the cylinoid?

dekoy411 · 10-23-2006

Check the tfi module. I have an 86 and it wouldnt start so i changed the starter which was part of the problem but i had to change the tfi module and stator too to finaly fix the problem.

pmillburg · 10-23-2006

I have also changed the module.

mustangcar · 10-24-2006

crankshaft position sensor? maybe its bad i hear they go out,iam not good with d.i.s ,I'm into distributors,I won't buy a ford without a distributor,so i guess iam stuck with the oldies,did you check for spark? good luck

b_chandler · 10-24-2006

I'm new here but I've been playing with these things for quite awhile.

Have you checked the timing belt?