[wightrob]

my transmition will not go into gear after the car has ran for a while maby 15-20 then it seems like the clutch is burnent out when it is cold and it starts it will go into gear no problem and it will drive like normal but after a about 10-20 minits it starts acting up. i converted it from a auto to a 5 speed it is a 1992 2.3 with a 1989 2.3 5 speed the bell housing is a 1992 also the pedals are from a 1992everything for the conversion is from the same car except for the trans and drive shaft they are both from the same car ass well. the clutch, preasure plate, throughout bearing, fly wheel, and both clutch cables 2" and 60" are all new can anybode tell me what might be the problem.

[pepegurr]

will it not go into any gear or is it going in and the clutch not engaging?

[wightrob]

it is as if the clutch does not work. if i force it it will go into gear but scratches when i do it

[pepegurr]

sounds to me like you might have gotten a weak pressure plate

[J. Quality]

Or The Clutch Needs Adjusting...iono...mind Grind In 3rd And Clutch Needs Adjusting

[wightrob]

i was also thinking the clutch assembly was bad or even the wrong one for my car. i have a 89 transmition on a 92 bell housing will that cause the problem?

[pepegurr]

it is possible that you got the wrong clutch but the bellhousings and trans are all the same as long as the bell is for a 2.3

[JSTANG17]

Cluch Cable Bad Too Might Replace It.


Member Of The Maple City Street Machines From Monmouth Il Come August 3rd 2007 6 To 10 Pm Cruise Night In The Maple City

[wightrob]

i put the old clutch preasure plate and through out breing in today and re ajusted the pedals and it works great so maby i just got a bad clutch kit . thanks for all the help