[sleeper_inc]

Does anyone have a link that would tell me how to do this conversion

[coolwaterblvd]

Go to brothers performance and get the cobra MAF conversion kit it has very good instructions and u get 24lb injectors a 73mm MAF and the cobra calibrated computer. All u need for the total 93 cobra experience is the intake and roller rockers after u do the conversion when u get the cash.

[coolwaterblvd]

sorry did not see u had a 2.3.

[sleeper_inc]

Yes, well now I hear the swap isn't even worth it because if I want to turbo it later its not that easy. I'll just throw my money in the bank for now and wait for a TC to pop up

[My'StangOpens]

doesnt anyone on this site convert from speed density to MAF?

i too want to convert to MAF and was just wondering if you can use junkyard parts for it.. like taking the sensors off another mustang?

[sleeper_inc]

Yes you can. But you need to change the wiring harness inside and out because it uses a different way to track the cruise control. You just need all the wires, MAF, computer, DP head, and the ignition box's (not sure what they are called) and a few other parts here and there and you can do the conversion

[My'StangOpens]

have you done this? id like a bit more detail.. i dont kno squat about wiring

[sleeper_inc]

You need all the wiring from the car, and no I have not done this. Check turboford.net. there are a few people who have done this to their 2..3 turbo. Same things apply