[dakotah2007]

i just converted my 1989 mustang 4 cyl to 5 lug.I used the SN 95 spindles for the front and the 8.8 disc brake on the rear. my question is are the tie rod ends to short because my tires are pointed inward.if so which tie rod ends do i use . thanks

[sleeper_inc]

Try adjusting yours out and see if it will work or not, if they don't then grab SN95 one's

[dakotah2007]

thanks ill try that

[HalfPackLX]

I believe you have to use the sn95 ends.

I just went to the wrecking yard and there were maybe 5-6 sn95s and all useable brakes and rear ends were gone. Pretty popular stuff.

[HalfPackLX]

Beleive you also ne the master cylinder, or at least the proportioning valve because of the rear disks.

[b_chandler]

Screw all that SN95 brake booster/master cylinder crap. Get the booster and MC from a '93 Cobra. No firewall mods, no BS.

[dakotah2007]

quick question the .330 spacer ,does it go on before you put on the spindle or after the spindle

[navi243]

what tie rods did u end up using?