I made 301 wrhp and 317 lbs of torque. I made this in 100 degree weather. I'm super impressed that I made this power just with a JLT2 intake and E85 in the tank. Justin at VMP tuning did a great job. The A/F ratio was right on the money.
My best "gasoline" pull was 291hp when the weather was 68 degrees! I love E85!
What kind of gas mileage are you getting on E85 VS. normal gas?
__________________
2008 Grabber Orange GT premium, 5 speed manual, 3.31s
Diablosport Predator Tuner and Bamachips tunes (93 Race, Torque, and Preformance), Boom Tubes
Kooks LT headers and catted H pipe, Steeda UDPs, delete plates, UCAs, LCAs, and Panhard brace, all waiting on time to install them
Nice, did your mileage stay the same as it was while running gasoline?
__________________
2006 GT black (AUTO)IUP Saleen supercharger:Saleen Super Shaker 3.2 pulley: GT500 fuel pump: Roush tensioner:XCAL2 :JBA Long tube headers:JBA O/R H-pipe:JBA axle back exhaust:YNOMAX Resonaters:Strange3:90 gears:TCI 3000:BMR upper and lower control arms with relocation brackets:Power house drive shaft:cervini ducktail wing: cervini side scoops
question is.....whats it burn like ? whats the specific gravity ? is there an octane rating for e85 ? can you run nitrous and or any other power adder on e85 ?
Quote:
Originally Posted by jonballi
Well...I am more than happy with the results!
I made 301 wrhp and 317 lbs of torque. I made this in 100 degree weather. I'm super impressed that I made this power just with a JLT2 intake and E85 in the tank. Justin at VMP tuning did a great job. The A/F ratio was right on the money.
My best "gasoline" pull was 291hp when the weather was 68 degrees! I love E85!
There is a ton of urban legends on E85 out there. Out here in TX more and more people are running it in their Mustangs. My mileage suffered about 2 mpg switching over. Yes you can run N20 with E85. Nitrous Express is building me a kit. When I spoke to NX they said E85 and Nitrous run very well together. They make many E85 N20 kits for a lot of applications. As far as I know...they are the only ones who make a kit.
There is no need to pull timing when spraying! Once the kit is installed I plan on posting numbers.