Hi all. I just installed the charge motion plate delete on my 07 GT and I got the Bamachips 93 Race tune for delete plates. The car doesn, wanna go above 4k rpm and I'm getting the check engine light with a bunch of codes like:
P0605
P1000- OBD System readiness test not complete.
P2015 Intake Manifold runner position sensor/switch circuit range/perf.
P2020- Same as above.
Has anyone have this problem, Please help. My baby is hurting. Thanks for any ideas
P0605 is a PCM ROM error... reflash the car back to stock and then reflash the custom tune. If that doesn't work, there's a chance that your tune is corrupt.
Hi all. I just installed the charge motion plate delete on my 07 GT and I got the Bamachips 93 Race tune for delete plates. The car doesn, wanna go above 4k rpm and I'm getting the check engine light with a bunch of codes like:
P0605
P1000- OBD System readiness test not complete.
P2015 Intake Manifold runner position sensor/switch circuit range/perf.
P2020- Same as above.
Has anyone have this problem, Please help. My baby is hurting. Thanks for any ideas
Yea mine is doing the same thing on the race tune , I installed the torque tune and it worked for awile and then back to the same.I am calling Doug today.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
I called Doug he sent me a new tune,he had to adjust the throttle wire or something like that. Wow my car is alive now.I can not wait to get to the track.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
I called Doug he sent me a new tune,he had to adjust the throttle wire or something like that. Wow my car is alive now.I can not wait to get to the track.
Not yet , he only sent the performance tune. I went back out last night and the torque tune which I loaded started acting weird. I would put the petal down about 2 to 3 inches and nothing happened. The power would not start untill the RPMS hit 4000 and then it went. I just like instant power like I had before. Now I have a lot more instant power on the Performance tune.I can not wait to get the Torque and Race tunes.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
Guys I have trued it all and nothing works. The tunes that Bama send me are not working . I still get those code: P1000, P2015, P2020. I have tried with the motor plugged and unplugged. and nothing. I don't know what else to do. The car still looses all the power above 4k. Any help will be gretally appreciated. Amazingly I loaded the steeda 90 mm for cmrc plates and is running good. But I have a C&L street intake so some where there it has to be a problem... Help help, help.. my baby is hurting
CMCV Bama 93 race tune trouble codes? 
Hi all. I just installed the charge motion plate delete on my 07 GT and I got the Bamachips 93 Race tune for delete plates. The car doesn, wanna go above 4k rpm and I'm getting the check engine light with a bunch of codes like:
