Supercharger With A Shaker Hood?

Wes77 · 07-31-2008

I was just wanting to know if you can put a supercharger on if you have a shaker hood system? Just wanting to know if any will fit. Thanks

**stlwagon** · 07-31-2008

Centrifugal will fit fine. A positive displacement (manifold mounted) is more of a problem but can be done. AFM member don_w uses his Shaker (heavily modified) with his Kenne Bell. I believe there are pics in his profile.

07gttom · 07-31-2008

check with jdm, they might be able to answer that question as far as the saleen units go

AFStang · 07-31-2008

I've seen a few of them used with the Shakers, but I believe that the shaker shroud (plastic that surrounds the manifold) had to be cut and modified to fit. I'm actually interested in the same topic since I have a shaker and look to possibly install a s/c in the near future...

**stlwagon** · 08-01-2008

Quote:

Originally Posted by AFStang

I've seen a few of them used with the Shakers, but I believe that the shaker shroud (plastic that surrounds the manifold) had to be cut and modified to fit. I'm actually interested in the same topic since I have a shaker and look to possibly install a s/c in the near future...

The shroud does need to be cut slightly to get a centrifugal to fit.

MSgt46270 · 08-01-2008

Quote:

Originally Posted by Wes77

I was just wanting to know if you can put a supercharger on if you have a shaker hood system? Just wanting to know if any will fit. Thanks

Quote:

Originally Posted by stlwagon

Centrifugal will fit fine. A positive displacement (manifold mounted) is more of a problem but can be done. AFM member don_w uses his Shaker (heavily modified) with his Kenne Bell. I believe there are pics in his profile.

Quote:

Originally Posted by AFStang

I've seen a few of them used with the Shakers, but I believe that the shaker shroud (plastic that surrounds the manifold) had to be cut and modified to fit. I'm actually interested in the same topic since I have a shaker and look to possibly install a s/c in the near future...

stlwagon is correct about Don_W car. The shaker is only there for looks now. But yes it can and has been done.

**stlwagon** · 08-01-2008

Quote:

Originally Posted by MSgt46270

stlwagon is correct about Don_W car. The shaker is only there for looks now. But yes it can and has been done.

I assume the same could be done with a Saleen or Whipple???

SnakeEater611 · 08-01-2008

Saleen is coming out with the SuperShaker. its a supercharger shaker hood combined but I don't think they are selling them yet.

MSgt46270 · 08-01-2008

Quote:

Originally Posted by stlwagon

I assume the same could be done with a Saleen or Whipple???

The current shaker won't fit with the saleen S/C, it if did I would have one alreay. It should fit the Whipple with mods mading it fit.

Quote:

Originally Posted by SnakeEater611

Saleen is coming out with the SuperShaker. its a supercharger shaker hood combined but I don't think they are selling them yet.

Your correct, but who would pay that much for the Saleen shaker??? Not me.

supershaker

SnakeEater611 · 08-01-2008

wow that is expensive. i didn't realize it was that expensive. its more than both the new KB Mammoth and the Roush TSV2300

$teve · 08-02-2008

Some links on the Saleen SC. I think it is my next mod.

Saleen : Speedlab : Super Shaker Dream Cruise Event

There is a 20 page thread on another forum
Shake and Bake...Saleen is at it again - Page 19 - ModularFords.com

Need to understand what will happen with MAF on my car as I 60# injectors and the SCT MAF. Waiting to see how JDM's first installs go.

Pricing for upgrade kit (if you have Saleen's SC) is about $1,300. Scheduled release end of August.