Do you need a tune after installind UDP?

TheKurgan · 11-25-2008

Quote:

Originally Posted by stlwagon

Not really true but if you have anything larger it might be an issue.

Ditto. I have a buddy with a shaker1000 and pullies and no problems. Also you don't really need an impact wrench. I"ve done 2 of these installs and a breakover bar is enough to get the bolt off.

**stlwagon** · 11-25-2008

Quote:

Originally Posted by TheKurgan

Ditto. I have a buddy with a shaker1000 and pullies and no problems. Also you don't really need an impact wrench. I"ve done 2 of these installs and a breakover bar is enough to get the bolt off.

I tried mine first with a breaker bar and just about gave myself a hernia. Then hooked up the air gun and zipped that bolt off in two seconds flat!

six5mustangfan · 11-25-2008

Quote:

Originally Posted by TheKurgan

Ditto. I have a buddy with a shaker1000 and pullies and no problems. Also you don't really need an impact wrench. I"ve done 2 of these installs and a breakover bar is enough to get the bolt off.

Hey guys sorry for the false info!

I thought I saw that on their website but I went and checked and didn't see anything. On the plus side this means I can add pulleys to my car one day