[RedFire07GT]

does anyone have a how to or any directions on 2007 mustang gt front bumper removal?

Thanks

[GT_921]

are you wanting to replace it?

there are two screws on top that you have to undo you have to top the hood to get to them. then there and a few in each fender well. and then dont forget the air dam plate that has four screws in the bumper and take the blinkers out. and that should be good.

there are people on here with better directions. i haven't taken mine off its too much work lol. i've replaced my grill by just removing the grill with the bumper still on the car.

[RedFire07GT]

well im changing the amber turn signals to black. so im replacing the hole light. id if i need to remove my bumper for that or jsut lift the car up and go underneath and do it.

[RedFire07GT]

i jsut looked under my car. i see if i move the wheels all the way to one side i can easily change the Turn signals without the front bumper removal.

BUT!!!! yes theres a "but" lol. i want to paint my stock upper and lower grills to a better black. i was wondering, has anyone remvoed there grills without taking off there bumper? if so please let me know a easier way. id like to save a headache or 2 by not removing the bumper jsut to removal my upper and lower stock grills.

[GT_921]

just lift the car onto jackstands or a set of ramps. cause can get to the marker lights with the bumper still on the car.. but the air plate will need to come off. i just thats the name for it. it keeps the road trash from going into the engine bay. once thats off you should be able to get to them with no problem

[stlwagon]

Front bumper R&R instructions.

[RedFire07GT]

well thank you stl. but i found out i did not have to remove my bumper.

just lifted the car up and turned the wheels and was able to replace the turn signals without a problem.

while i was at it i decided to paint my grills as well. will show a few pictures after there dried and installed again.

[stlwagon]

Originally Posted by RedFire07GT

well thank you stl. but i found out i did not have to remove my bumper.

just lifted the car up and turned the wheels and was able to replace the turn signals without a problem.

while i was at it i decided to paint my grills as well. will show a few pictures after there dried and installed again.

Did you pull the wheel well liners? That makes it really easy.

[RedFire07GT]

yeah i pulled them out. made it so easy. tkaing my grills out was a pain... well the upper was.

[RedFire07GT]

heres a photo of the new turn singals. i like how they match the headlights.

(Grills are of b/c im painting them.)

http://img23.imageshack.us/img23/638...signalsbe2.png
http://img23.imageshack.us/img23/bra...png/1/w600.png

[RedFire07GT]

heres a photo of my stock grills i painted and some covers on the foglights as well as trhe new black turn signals.

Next week im installing the FRPP 1.5"Springs BMR Adj Panhard GT500 Strustmounts and the Eibach Camber Bolts.
http://i654.photobucket.com/albums/u...T/finished.jpg

[stlwagon]

Sounds like you've got a busy week planned!

[RedFire07GT]

yes i do lol.