jsut recieved my Kooks LT's and off-road xpipe form Rich at radmustangs in the mail today. will be installing this weekend.
Nice choice, same as I run. I know you got a good deal. Did you get the extentions, he forgot them on my order? Have fun installing them if you need any help just pm me.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
Yes and when you get a dyno tune it more accurate then the tailpipe sniffer
Couldn't I use the second O2 sensor? Obviously it won't be that accurate as the first one... But with the Off-road H-pipe and Brenspeed tune, my second set of O2 sensors are shut off, so I could always use them for a A/F meter.... maybe?
Couldn't I use the second O2 sensor? Obviously it won't be that accurate as the first one... But with the Off-road H-pipe and Brenspeed tune, my second set of O2 sensors are shut off, so I could always use them for a A/F meter.... maybe?
That is what I do.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
Couldn't I use the second O2 sensor? Obviously it won't be that accurate as the first one... But with the Off-road H-pipe and Brenspeed tune, my second set of O2 sensors are shut off, so I could always use them for a A/F meter.... maybe?
Yes you can and a lot do. But if its off the best place is up as close as you can get to the end of the headers is more accurate.
__________________
07 REDFIRE GT 5 SPEED 3.55 gears
C&L Racer CAI XCAL2/Seq signals/GTAs/Steeda UDP/CHE K Member Brace W/Torq Links/J&M LCA/Spider DS/PRO.50 Shifter Hurst handle & "T"/Meziere EO2/ARH LT catted H /Prothane MM/Delet Plates/SLP BOSS 429 Scoop/Accel COP/PowerSlot/Hawk Pads/Tokico D-Spec/CHE Panhard Bar Brace/Steeda Adj. Panhard Bar/BMR F/R Sway Bars/Cervini ducktail spoiler/BMR UCA Mount/CHE UCA/GT\CS Rear Cover/AMChrome Bullets 18x9/10s/Nitto 255/45&295/45
Tillman Dyno Tune 307HP/322TQ
Nice choice, same as I run. I know you got a good deal. Did you get the extentions, he forgot them on my order? Have fun installing them if you need any help just pm me.
yes i recieved the extention with the gaskets too. Rich ran out of Kooks LTs so he ahd to have mind shipped from Kooks themselves.
so im guessing they sent me evetything i need.
__________________
All Motor-281ci tuned by JJ at Woodbine MotorSports.
i have one extension a package of bolts and new gaskets. Is this what comes with the package?
If you have an auto you will need 2 more at least. You will need 2 for the back o2 sensors for sure, if you have a manual. I also used OEM Stock gaskets. I use the stock bolts. I had to modify 2 bolts to fit. I cut them down.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
If you have an auto you will need 2 more at least. You will need 2 for the back o2 sensors for sure, if you have a manual. I also used OEM Stock gaskets. I use the stock bolts. I had to modify 2 bolts to fit. I cut them down.
i have a manual. kooks only sent one.. wierd. why do they only send one to people.. :/ well i just got outta work so im gunna go start a little bit today and finish up tomarrow.
__________________
All Motor-281ci tuned by JJ at Woodbine MotorSports.
i have a manual. kooks only sent one.. wierd. why do they only send one to people.. :/ well i just got outta work so im gunna go start a little bit today and finish up tomarrow.
Just take your time and do a good job. That is the most important thing. Make sure you clean the surface of the heads real clean.
__________________
Airraid CAI/BAMA tune,moto blue pullies,3:73`s,LPW girdle;Powerhouse DS,CHE safety loop,CHE LCA`S & Adjustable UCA,Kooks LT`S & O/R X Pipe,prothane MM`s,Steeda CMDP`S,Eibach springs,Tokico D specs,Polished TB(by Me),Steeda radiator support,MT DR`S,Zex kit 100 shot. Taylor Relocation batter kit and cut off switch
11:933 ET, 1.674 60`,111.877 MPH 5600 feet above sea level 6900 D/A
Just take your time and do a good job. That is the most important thing. Make sure you clean the surface of the heads real clean.
I actualy was getting ready to do the install. had the car up on stands and everything ready to go. and i said to myself, why dont i give my tuner a call whose doing my head/cam install.
so i gave him a call and he said he would rather put the long tubes on when changing the heads. makes it easier yanno.
__________________
All Motor-281ci tuned by JJ at Woodbine MotorSports.
I actualy was getting ready to do the install. had the car up on stands and everything ready to go. and i said to myself, why dont i give my tuner a call whose doing my head/cam install.
so i gave him a call and he said he would rather put the long tubes on when changing the heads. makes it easier yanno.
They have to be disconnected anyway.
__________________
07 REDFIRE GT 5 SPEED 3.55 gears
C&L Racer CAI XCAL2/Seq signals/GTAs/Steeda UDP/CHE K Member Brace W/Torq Links/J&M LCA/Spider DS/PRO.50 Shifter Hurst handle & "T"/Meziere EO2/ARH LT catted H /Prothane MM/Delet Plates/SLP BOSS 429 Scoop/Accel COP/PowerSlot/Hawk Pads/Tokico D-Spec/CHE Panhard Bar Brace/Steeda Adj. Panhard Bar/BMR F/R Sway Bars/Cervini ducktail spoiler/BMR UCA Mount/CHE UCA/GT\CS Rear Cover/AMChrome Bullets 18x9/10s/Nitto 255/45&295/45
Tillman Dyno Tune 307HP/322TQ
12.942 @ 113.88 MPH w/ a 2.139 60' time?
