[ImportBully2250]

Hey whats up everybody, i had a few questions on installing my vaccum and oil pressure guage. i was told to get a T adapter to install the vaccum line somewhere around the throttle body but i don't know which hose. Also i was told to get a T adapter to install the oil pressure sender unit somewhere under the car but i don't know where, plz i need help

[stlwagon]

T it into the line that runs to the fuel pressure sensor on the drivers side fuel rail.

[GT Thunder909]

When i put my gauges in for the vaccum gauge i put a t in a vaccum line on the passenger side of the car up by the ac accumulator and for the oil pressure gague here is a link to what you need to do.
Installation of Oil Pressure and Water Temperature Gauges
There is a picure about halfway down of the oil filter and you will need to get the t fitting and the one that is going into the piece on the car.

Are you getting the autometer gauge kit? Is the one your getting electric or mechanical?

[stlwagon]

There is no line to tap on the passenger side on an S197 GT.

[ImportBully2250]

Oh ok, so I guess the vaccum guage won't be as difficult jus tap into a vaccum line. When instaling the oil pressure sending unit would I hav to worry about oil spil?

[stlwagon]

Originally Posted by ImportBully2250

Oh ok, so I guess the vaccum guage won't be as difficult jus tap into a vaccum line. When instaling the oil pressure sending unit would I hav to worry about oil spil?

Just add it on to the existing sender.

[ImportBully2250]

Thanks, I really appreciate it

[ImportBully2250]

Originally Posted by stlwagon

Just add it on to the existing sender.

i tried to tap with the existing wire which is a grey wire, but my guage is still reading 0, im thinking it's probably gauge cuz it's mechanical. should i try the t adapter?

[vashthe3rd]

Why are you needing to check or read your vacuum again?