[stangl0r]

Well 2 days ago i put the tuneable induction CAI on with the SCT Tune. I used the 87 tune from demelot. Car has been running alittle funny. When stopping from a coast the rpms were ranging 5--1500 and i felt that i lost alittle power down below. Last night i got codes P2196 and P2198. Pulled them today and its my o2 sensors stuck rich. Sine i highly doubt the o2's both went bad at the same time right after the tune im wondering what i should do? i dont want to just turn them off for fear i might f something up...let me know guys

[stlwagon]

Probably need to have your A/F ratio checked. The tune might be off.

[lmmmmm]

call John at TI.

He will make sure it all gets straigthened out.

[JP DeMolet]

Sorry to take so long to respond to your post. I haven't been able to get onto the forum since yesterday.

Make sure you pulled the correct fuses when uploading the tune.

Verify their # and positioning on my 'online install guide' , step # 24.
I've had a few pull the incorrect ones, or none.

It's very unusual to trip the 'too rich' code and these same tunes have been in service for a year.
Check also to make sure you don't have the PCV line pinched.

Clear the codes, pull the correct fuses, check the PCV line, and then reupload the same tune.

Call toll free 866-509-7453 if there is any continuing problem.

[cortc]

If your SCT is like mine then make sure you go through the options and that you chose the tune for the CAI...