Quote:
Originally Posted by ozan169 hi ppl
just got my 2005 Mustang StreetFighter Torque Converter put in at my garage. done all the tunes what was needed from brentspeed.
went to take it for a drive pulls lovely in 1st and 2nd BUT it dosent want to change to 3rd it keeps hitting the rev limiter. then after the over drive light comes on starts flashing on and off. so we took it back to the garage they thought it mite not have enough fluid in the transmission. they put some more fluid in took for a drive agen same things happon ?
any idea's ???????
thanks | Did they fill the T/C itself before they installed it? BTW my tune was just fine after the T/C install. No changes were made to the tranny tune. You might try returning to the stock tune or whatever tune you were running before the install and give it another go. If that doesn't cure the problem I'd call TCI and ask for Kevin Winstead. He's the T/C guru there for these trannys. Good luck. This is a problem I have never heard of until now. It's probably something simple.
__________________ 2005 Mustang GT,Auto, Saleen S/C,9.5 psi, JDM/GT500 twin fuel pumps, TCI Super Street Fighter custom T/C, Kooks LT header/X-pipe, 3.73 gears, Eaton posi, SCT tune by Dynospeed Racing/JDM, Suspension by BMR,Steeda,Strange Engineering. 11.32 @ 120MPH, 1.58 60'.
95 GT project car underway. |