Have a ValentineOne on the way. Not sure exactkly sure hiw I will mount, but will start with visor clip. Will hardwire -- plan is into the housing that holds the interior lights. Question - is there a switched wire in the interior light housing?
__________________
2006 Redfire GT Vert Auto, every factory option, 490rwhp JDM Saleen SC, One piece driveshaft, Steeda ultralight springs - rear adjustable UCA and LCAs, CHE relo brackets, Granelli front cross-member, Intrax sway bars, Tokico dampers, Hawk brake pads, Shelby Redline wheels and Nitto tires, GT500 exhaust, FRPP 3.73's, Pioneer AVIC-D3 navigation head unit, and Saleen HID headlights. See profile for appearance mods
Yea if you have lighted visors u can use it for the juice for the detector. Just make sure the detector does no absolutely need the plug to convert to ac current if that is the case you have a lot of work ahead of u. When you get it unscrew the pulg and see if there is a resistor in it to modify the current to it. if it just has a fuse or none at all you can wire it up to the visor. Or u can ground it to the dome light ground wire and run a wire to a ignition on source. Also make sure u use the ignition on wire or every time u go to listen to just the radio the detector will drive u crazy turning on every time u go to ACC.
I had Ford install their auto dimming rear view mirror w/garage door opener transmitter (it's now an option for 2007) and asked them to run an extra power cable for my Valentine 1. It's not difficult to do, but you will have to remove some of the decorative interior trim pieces. If you can get a copy of the instructions for installing the mirror, that might show you how to install a power cable for the Valentine 1. I believe there is a fuse box on the front passenger side that they tied into.
Hmm, easier to just not speed until you get to the track, then hit it hard.
__________________
05 - Zeon body kit, Saleen S/C, 3.6" pully, 90mm MAF, L/T Heders, Catted X-Pipe, Saleen Race Craft suspension, Axel brace, Pan hard bar. More to come this spring from my friends at PMP and Larry H.
65 - Street force coil over front suspension, Wilwood disk breaks at all 4 wheels, More construction in progress! More to come this spring from Simons Auto & Restoration!
I used the suction cup mount and placed my V1 high and to the left of the rear view mirror. I think all the wires in the dome light are hot 24/7. I ran the straight wire (also same as the escort and bel wires) to the fuse box on the passenger kick panel. Just found a fuse that was switched and pluged the wire into it. Goes on and off with the key. Those tiny wires are a beoach to strip.
__________________
06 Vista Blue Premium GT, Automatic, CDC Shaker Hood System, Pioneer AVIC Z2 DVD/ Navigation System with Rear View Camera, Rear Window and 1/4 window Louvers, CDC Classic Chin Spoiler, SHR Honeycomb Panel, Stainless Tail light Bezels, FRPP Stingers, 3D Carbon Side Scoops, C&L Street CAI, SCT X2 W/ 93 Street-Race Tune, Sequential Turn Signals, CDC Hood Struts, TCI Street Fighter Shifter
Hard wiring radar detector 
