I am in the market to purchase some window scoops, side scoops, and maybe a Hood scoop and I notice that no matter where I look, everyone attaches them to their car via 3M Tape. How long will this adhesive last? Would I have to worry aboout going to fast and the scoops flying off? What has been you guys and girls experience with these products?
Thanks for all your input
__________________
2006 Mustang GT Coupe Automatic
Mods:
C&L Street Intake, 93 Octane Tune, Pypes O/R H-Pipe, Flowmaster Axelbacks
It holds like steel and it won't come off unless you take it off. I removed my 3D Carbon hood scoop in January before I had my stripes painted. What a mother that was to get off!
Here's another question for those of you with Window Scoops, how do you clean the windows if you have the slotted scoops? What fits through the slots and gets to the windows?
__________________
2006 Mustang GT Coupe Automatic
Mods:
C&L Street Intake, 93 Octane Tune, Pypes O/R H-Pipe, Flowmaster Axelbacks
Here's another question for those of you with Window Scoops, how do you clean the windows if you have the slotted scoops? What fits through the slots and gets to the windows?
The Roush louvers are removable but I think they are the only ones that are. The others would be tough to clean. Mine are solid so I don't worry
It holds like steel and it won't come off unless you take it off. I removed my 3D Carbon hood scoop in January before I had my stripes painted. What a mother that was to get off!
Will it hold that well even in a very hot climate like Phoenix? I have had experience with a lot of adhesives turning soft in the Arizona sun. Would that ever be the case with this particular adhesive?
__________________
GO TEAM BULLITT. Check out our audition video in my profile!!! Then check us out on the SPEED channel Feb. 9th on BULLRUN season 2!!
Will it hold that well even in a very hot climate like Phoenix? I have had experience with a lot of adhesives turning soft in the Arizona sun. Would that ever be the case with this particular adhesive?
I have the Roush hoodscoop and it uses more than just 3M tape. You have to drill the hood so the scoop is held down with 7 bolts and 3M tape. I was a little leary at first at drilling the hood, but it comes with a nice big template so you would have to be cross eyed to screw it up.
The Roush window scoops look really nice and are removable like stlwagon said, but I still haven't bought them since I think it might be a pain to remove them every time I want to clean the windows, plus the brackets the scoops screw into are held on with 3M tape so I would think continually removing and reinstalling those scoops would eventually break the tape bond. I also have a 3D carbon trunk black out panel that is held on with just 3M tape and if you've ever seen that piece up close, it's thick to fill up the depression back there (other brands are just a thin piece of plastic). The tape is rock solid even when you slam the trunk. I still have a CDC chin spoiler to install and it has screws on the ends, but 3M tape across the middle...I have no doubt that tape will hold at speed. That tape is some serious stuff.
__________________
06 Stang GT, Yeah I got stuff! Check out my profile for the low down.
I might just go with the ones www.silverhorseracing.com are selling that are flush mounted like the ones on the classic stangs 66/67 I believe. They look really good. They would be $288 painted for the Vista Blue ones. Someone on this site started a thread yesterday about the one they purchased and they look great.
__________________
2006 Mustang GT Coupe Automatic
Mods:
C&L Street Intake, 93 Octane Tune, Pypes O/R H-Pipe, Flowmaster Axelbacks
I ordered a set from Silver Horse Racing yesterday for my wife's pony car...she complains too much about not being able to see out that window....lets see if its worth the new louvers
__________________
Saleen S/C 3.2 pulley tuned by JDM Engineering, GT500 pumps, CHE goodies on the rear, 4.10's, KOOKS/ high flow catted X pipe with PYPES Violators, Spydershaft, TCI 3500 stall, PA deep tranny pan. Meziere w/p,M&H 325/45/17 DRs.
future mods.... a 3.0 pulley
Window, Side and Hood Scoops durability 
I will definitely bring it to a professional.
