[CobraFrank08]

Uhhh.. Wheres the PDf?

[stlwagon]

Originally Posted by CobraFrank08

Uhhh.. Wheres the PDf?

Are you looking for install procedures?

[JMCSD]

I AM!!! hehe, old thread I know but still. I have found a couple of instructions for the install... however one of the instructions (while of good quality) requires taking everything off piece by piece. The other instructions keep everything together but the instructions are of pretty low quality (and bad pictures to) so i want to try and find a good set of 'em. Any help here?

[JMCSD]

Ok, never mind here. Found Kyle's instructions . However, I have a question. In one set of instructions is says to torque the bolts (connecting intake to block) to 10 ftlbs. Whereas other instructions say to torque to 89 lb-IN... I may not be the best at math but 89 in is not the same as 10 ft....... or is it? Please give me some numbers I can work with here

[stlwagon]

Originally Posted by JMCSD

Ok, never mind here. Found Kyle's instructions . However, I have a question. In one set of instructions is says to torque the bolts (connecting intake to block) to 10 ftlbs. Whereas other instructions say to torque to 89 lb-IN... I may not be the best at math but 89 in is not the same as 10 ft....... or is it? Please give me some numbers I can work with here

It's 10 Nm, not 10 lb-ft. Or 89 inch lbs. 89 lb-in equals ~7.5 lb-ft.