[cerino2000]

I am going to add the shaker 1000 amps/subs to my current 500 system but I need the wiring diagrams to do it.

Does anyone know for sure if the wiring is pre-existing in these cars? I know in days past that it was cheaper in manufacturing to use the same harness. If you didn't have an option, the wiring would still be there, just tucked away but experience tells me that this may not be the case now a days.

If it's not there I can make my own harness but would need the diagrams.

Thoughts from anyone?

[j_88gt]

i think if i remember right you have the harness from the radio up to the in-line connector on the passanger side kick panel complete. from there on you have to make your own harness. well the harness is there you just need to add several wires to the amp and speakers in the back. if i remember right you will need about 3-4 maybe 5 more circuits to be added. and i think the radio is different

[cerino2000]

Originally Posted by j_88gt

i think if i remember right you have the harness from the radio up to the in-line connector on the passanger side kick panel complete. from there on you have to make your own harness. well the harness is there you just need to add several wires to the amp and speakers in the back. if i remember right you will need about 3-4 maybe 5 more circuits to be added. and i think the radio is different

For the amps and subs, all the wiring is complete from the connector at the back. In other words, the person that I am getting the subs from simply unplugged the entire unit from there so the wiring from the amps to the subs is there.

Based on what you told me it sounds like I need to create the wiring from the kick panel to the connector that the sub/amp unit connects to.

[j_88gt]

if i remember so yes? can you read wiring diagrams? maybe i can send it to you?

[cerino2000]

Yes, I can read the diagrams.

[j_88gt]

Sorry Dude I Tried But Ford Doesn't Let Me Copy And Send Them Anymore Only Print Them

[cerino2000]

Hey, no prob. Thanks for trying!