I'm a 1st Time Mustang GT Owner with many Questions
Here is a copy of a shopping list I am considering after trying to find all of the info Here in the forums. CAN I please get a GO or NO-Go for these items based on hands on experience / support?
Here is a copy of a shopping list I am considering after trying to find all of the info Here in the forums. CAN I please get a GO or NO-Go for these items based on hands on experience / support?
1) GO 2) GO, unless your getting a supercharger real soon.. ive heard they are the best bang for your buck..
3) Id also say GO 4)No idea.. havent really looked into it before.. 5) Go, but i may be bias since i have one .. that was my first mod!
__________________
2006 Mustang GT A/T Performance//JLT intake + Tillman 93 Street Race//Flowmasters//FRPP 3.73s//Powerslot Slotted Rotors//Hawk HPS////Pypes LT Headers//O/R X//FRPP Stingers Show//20in DD Black bullitts//Nitto NT555's//CDC Classic//Roush Scoop//Street Scene 1/4 Louvers//GT500 Rear Wing//FRPP Lowering Springs//Maximum Motorsports Caster/Camber plates//8000k Heads/Fogs//Blacked out Sequentials
1) GO 5) Go, but i may be bias since i have one .. that was my first mod!
??? Your profile says you have the classic spoiler. I would say no-go on the aggressive one. You have to cut on the facia and it looks like a cow catcher compared to the classic one.
__________________
06 Stang GT, Yeah I got stuff! Check out my profile for the low down.
Need help with the under pullies, racing springs and the Steeda charge motion control plates?
Any feedback out there ?
Fred
Yes on Steeda U/D Pullies, Yes on the Ford Racing springs although I went with the Steeda's, and No on the Steeda Billet charge motion plates. They have the economy version for $160.00 less.
I;m all for quality but there is absolutely no difference in the functionality of the 2.
__________________
05 White GT Premium 5 Sp. IUP, Active Alarm
BMR, C&L, Centerforce, Fidanza, FRPP, GI Joe, JBA, JDM Engineering, LPW, Saleen, SCT, Steeda, SOS
YNo on the Steeda Billet charge motion plates. They have the economy version for $160.00 less.
I;m all for quality but there is absolutely no difference in the functionality of the 2.
Steeda claims the ports are a little bigger. Not sure if that would make a difference or not.
I read the same verbage and they say a .70 increase in port diameter over the economy ones. Alot of $ for .70 and the same "Up to 10 HP" verbage in the item description. I am going to pass on them for now.
I read the same verbage and they say a .70 increase in port diameter over the economy ones. Alot of $ for .70 and the same "Up to 10 HP" verbage in the item description. I am going to pass on them for now.
All other items were ordered today.
Fred
The cast plates are fine... Or, if you can find the FRPP plates, they are even cheaper.
OK dumb question: If the stock plates have butterflies in them (Air Disruption) and the Steeda Cast Plates don't can I pull the stock one off and use a dremil to remove them?
If the Steeda plates offer no restrictions on the air movement thru them does the Helix Throttle body spacer (" creates an air vortex) going in then will they neturalize each others purpose?
I'm a 1st Time Mustang GT Owner with many Questions 
.. that was my first mod!
