[GTVapor]

I installed my street scene blackout panel yesterday and it was a bit off center so I removed it today. I have removed all of the 3m tape from the panel and just purchased another roll. Is it ok to install the doublesided tape without the use of adhesion promoter? The rear of the trunk has been thoroughly cleaned and is free of wax. Has anyone else installed their panels without first using adhesion promoter?

[hotshot]

just wipe it down with an alcohol swab for extra insurance. It should be fine however.

[BRENSTANG03]

yes i would think so just make it really clean and warm out.

[MakeMyStang]

Originally Posted by GTVapor

I installed my street scene blackout panel yesterday and it was a bit off center so I removed it today. I have removed all of the 3m tape from the panel and just purchased another roll. Is it ok to install the doublesided tape without the use of adhesion promoter? The rear of the trunk has been thoroughly cleaned and is free of wax. Has anyone else installed their panels without first using adhesion promoter?

I installed mine WITHOUT the adhesion promoter several years ago is it holds fine.
Just reclean with the alcohol (I use 91% vs 70% bought at WalGreens) and you will be fine.