[06 Slvr Bullitt]

Can someone who has replaced their Shaker 500/1000 stereo with an aftermarket stereo take a good detailed picture of the back of the Shaker stereo headunit for me? I need this pic because I want to upgrade to a Phatbox digital music player in the future (I got a Kenwood Music Keg that was in the ol' Cavalier and I loved it, still have it actually) and I need to see if the connectors for the newer head units are different than the ones listed on the Phatnoise website, which are for Ford head units up to 2004 and does not included the Shaker audio systems.

[06 Slvr Bullitt]

Bump...

This would really help me out if someone who has taken out their Shaker 500/1000 stereo can take a picture of the back of the head unit.

No, I don't want to take mine out, which is why I'm asking for the pic...thanks.

[fishingjts]

This is the harness we used when we replaced my Shaker 1000. hope this helps

http://www.audiooutfitter.com/store/104683/70-5521.html

[markymarc1964]

I replaced my Shaker 1000 system this past weekend and have all the components sitting on the floor in my living room. Please let me knwow if you still need the pic and specifically what you need. Then I can use my camera phone and snap the pic you need.

By the way. Do you know anyone who would be interested in buying the components I have?

Thanks
Markymarc

[tsaints1115]

http://franksperformance.com/Forums/...pe=post&id=211

Here this might help. I used this pdf when I repalced my 500 with an Alpine.

[06 Slvr Bullitt]

Originally Posted by markymarc1964

I replaced my Shaker 1000 system this past weekend and have all the components sitting on the floor in my living room. Please let me knwow if you still need the pic and specifically what you need. Then I can use my camera phone and snap the pic you need.

By the way. Do you know anyone who would be interested in buying the components I have?

Thanks
Markymarc

Markymarc if you could take that picture and post it for me I really would appreciate it. I just need a high quality picture of the (entire) back of the stereo...connectors, plugs, whatever is in the back to see what I'm potentially working with. As I said earlier, I have a Kenwood Music Keg which works very similiar to a Phatbox instead it uses a 12 pin connector (for Kenwood radios) instead of square pin connector for older Ford radios. Contact with Phatnoise yielded no positive response as they have yet to test their Phatbox digital music system on the new Mustangs (actually they have no intentions on doing so) and I want to see if there's a chance of these two devices being compatible (shaker radio and Kenwood Music Keg or Ford Phatbox). At this time, I want to do whatever I can to preferably install my Music Keg first, buy a Ford Phatbox second before I would have to resort to getting an FM modulator for the Kenwood Music Keg, as that would be the last thing I want do, but I want either my Music Keg or a Ford Phatbox back in my car.

[MarkD]

Originally Posted by markymarc1964

I replaced my Shaker 1000 system this past weekend and have all the components sitting on the floor in my living room. Please let me knwow if you still need the pic and specifically what you need. Then I can use my camera phone and snap the pic you need.

By the way. Do you know anyone who would be interested in buying the components I have?

Thanks
Markymarc

How much are you asking for it ??

[Cobra Kid]

Here you go Buddy! 07 Shaker 500 with Aux Input.

I hope I'm not to late!


CK

[Cobra Kid]

Sorry guys! I did'nt realize the orig post was over 2 years ago. Duh!