AFM Web

Go Back   Ford Mustang Forums > Mustang Forums > 2005 + Mustang > 2005-2009 V6 Mustang Tech
Welcome to AllFordMustangs.com. We look forward to you registering on our forum and making your first post.
 
Introductions | Lounge | 2005+ GT Tech | 2005+ V6 Tech | 2005+ Talk | Mustang Tech | Racing | Regional 
 

Reply
 
Old 07-15-2008   #1 (permalink)
Lobro0710 is offline Rookie


Joined: Jul 2008
Posts: 2 Threads: 2
 Lobro0710's Country Flag
Tinley Park   Illinois
Default 2005+ Clear Corners

I just got a white 2007 V6 Mustang and was looking to get some clear corners as one of my first mods. I tried Blue Oval but they got everything messed up so now im looking anywhere else. any help? and any other good moding suggestions?
Lobro0710 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-15-2008   #2 (permalink)
Black05Pony is offline Senior Member

V6 Member
S197 Member


Joined: Nov 2005
Posts: 2,083 Threads: 74
 Black05Pony's Country Flag  View Black05Pony's 17 photos
San Diego   California
Default

I got mine from eBay for like $60 and have had no problems thus far.

Other suggestions? Intake/tune for performance (20 rwhp or so), exhaust for performance (10 rwhp or so) and add taller gears and a limited slip differential to really wake it up.

Cover those 1/4 windows up with something too, whether its a set of scoops or louvers, anything is better than the stock look.
__________________
Black 2005 Mustang v6, 5 speed, IUP, EUP and Leather.

Razzi 1/4 window scoops, Mustang GT Sway Bars, Flowmaster American Thunder Single Exhaust, Clear Front Turn Signal Lenses, Demolet CAI, X-cal2 91 tune, Hurst Comp/Plus Shifter, FRPP T-Lock, Ford 3.73 gears
Black05Pony is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-16-2008   #3 (permalink)
FadeToWhite is offline Rookie

V6 Member
S197 Member


Joined: May 2008
Posts: 24 Threads: 4
 FadeToWhite's Country Flag  View FadeToWhite's 11 photos
Portland   Oregon
Default

you might try zeta products for clear turn signals (and get the stealth bulbs so you don't have an orange blob behind the lenses).
they also side clear side markers.
it's on my to-do list as well, for my 2006 white V6.
FadeToWhite is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-16-2008   #4 (permalink)
Umfann131 is offline Rookie


Joined: Jul 2008
Posts: 28 Threads: 3
 Umfann131's Country Flag
561   Florida
Default

how hard are these to install??
Umfann131 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-16-2008   #5 (permalink)
05silverstangv6 is offline Apprentice

V6 Member
S197 Member


Joined: Oct 2007
Posts: 237 Threads: 22
 05silverstangv6's Country Flag  View 05silverstangv6's 19 photos
Richmond   Virginia
Default

install is easy but kinda cramped work space behind that wheel. also you will have to get new bulbs if you wanna keep it legal. i got jus plain amber bulbs which dont look bad you cant really notice the color during the day unless you get right up to it and it will always be orange at night even with the stealth bulbs but the clear corners in my opinoin look alot cleaner
05silverstangv6 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-16-2008   #6 (permalink)
Umfann131 is offline Rookie


Joined: Jul 2008
Posts: 28 Threads: 3
 Umfann131's Country Flag
561   Florida
Default

ok cool thanks so you did it in the wheel well because i cant get under the front because of the 3d carbon air dam
Umfann131 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-16-2008   #7 (permalink)
BullMeister is offline Made Member

V6 Member
S197 Member


Joined: Jul 2007
Posts: 1,602 Threads: 86
 BullMeister's Country Flag  View BullMeister's 1 photo
Western   Colorado
Default

Quote:
Originally Posted by Umfann131 View Post
ok cool thanks so you did it in the wheel well because i cant get under the front because of the 3d carbon air dam
You have to remove 3 or 4 screws to pull the fender liner out of the way in the wheel well because the side markers tip in and out on one side (tab on one end). You don't have to remove the wheel, just turn it so it isn't in the way. You can do all the work from inside the wheel well. You don't need to crawl under the front lip of the vehicle.

Here's a link for both the smoked and clear sidemarker/turn signals. You can also probably get them at mossmustang.com and americanmuscle.com.

2005 2006 2007 2008 Mustang Lighting at V6MustangStuff.com
__________________
2005 V6 Mustang coupe. Automatic. Black with Charcoal Interior
Mods: JLT CAI, Bamachips 91 race tune, single Mustang V8 muffler, Mustang V8 swaybars
Looks: smoke front turn signals, sequential taillights, 14" shorty antenna, MRT rear window louvers and a little chrome for the interior
2000 C5 Corvette convertible, Torch Red with Black Interior. Full of options, Corsa exhaust
1990 Ford Bronco 351ci engine- it runs.
BullMeister is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-16-2008   #8 (permalink)
Umfann131 is offline Rookie


Joined: Jul 2008
Posts: 28 Threads: 3
 Umfann131's Country Flag
561   Florida
Default

Awesome thank you so much my main hesitation was the install but know im going to do it for sure
Umfann131 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-17-2008   #9 (permalink)
stlwagon is offline Site Administrator

S197 Member


Joined: Oct 2005
Posts: 64,524 Threads: 678
 stlwagon's Country Flag  View stlwagon's 53 photos  View stlwagon's 4 classified ads
Southern   Maryland
Send a message via Yahoo to stlwagon
Default

Quote:
Originally Posted by Black05Pony View Post
I got mine from eBay for like $60 and have had no problems thus far.

Other suggestions? Intake/tune for performance (20 rwhp or so), exhaust for performance (10 rwhp or so) and add taller gears and a limited slip differential to really wake it up.

Cover those 1/4 windows up with something too, whether its a set of scoops or louvers, anything is better than the stock look.
I picked mine up from Ebay too. Was a little concerned but the quality was great!
__________________
AFM Site Administrator
2005 Mustang GT
stlwagon is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-18-2008   #10 (permalink)
05silverstangv6 is offline Apprentice

V6 Member
S197 Member


Joined: Oct 2007
Posts: 237 Threads: 22
 05silverstangv6's Country Flag  View 05silverstangv6's 19 photos
Richmond   Virginia
Default

Quote:
Originally Posted by stlwagon View Post
I picked mine up from Ebay too. Was a little concerned but the quality was great!
yea go ebay there great alot of the car stuff is sold buy power sellers with ebay stores
05silverstangv6 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-20-2008   #11 (permalink)
silver_stang200 is offline Rookie


Joined: Dec 2006
Posts: 23 Threads: 1
 silver_stang200's Country Flag
Crete   Illinois
Send a message via Yahoo to silver_stang200
Default

i have clear corners on my ride here is a pic http://farm3.static.flickr.com/2056/...34ec2a.jpg?v=0 got them bolth front/rear off ebay 60 bucks shipped
silver_stang200 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
2005 Mustang GT... Need help choosing gears mattymustang22 2005-2009 Mustang Talk 19 08-20-2009 10:38 AM
2005 Mustang GT... Installed MAC axle back exhaust mystang68/05 2005-2009 Mustang Talk 10 06-20-2009 11:53 AM
Added MyColor instrument cluster to my 2005 Mustang GT bigbird 2005-2009 Mustang Talk 33 03-30-2009 01:00 PM
2005 V6 Mustang... Tune needed for a CAI? mustang-661 2005-2009 Mustang Talk 25 08-21-2008 03:04 PM
2005 Mustang door misalignment 2horseowner 2005-2009 Mustang GT Tech 2 09-10-2007 11:06 PM

sponsors

Mustang Photos
Add to Favorites    Link to us    Contact    Directory    Site Rules    Archive    Terms of Use    Privacy    Top Sites    RSS    Meet Our Sponsors    Advertise   
AllFordMustangs is not affiliated with or endorsed by Ford Motor Company. ©Copyright 2002-2010 All Auto Enthusiasts Network

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112