getting rid of speed govener

madmailman96 · 10-15-2008

well, im looking to get rid of my speed govener on my 07 v6 mustang, and i was reading up and i see that some chips can do that, but im going to buy a powerhouse411 turbo, and i was wondering if the tuner that comes with the turbo would be able to remove the speed govener with ease, or do i need to know alot about tuners to do it, or if it can even remove it at all.
keep in mind i dont care if it voids my warranty, or i wouldnt put the turbo on it when the car has only 5k miles in the first place, and i dont have to worry about the driveshaft breaking, because im getting the aluminum one piece driveshaft, and my tires are rated to 160mph

Thereaper · 10-15-2008

SCT X3 should do the trick.

Vlad · 10-16-2008

if you are getting a turbo you'll need a custom tune and I am sure they'll turn that off.

SDS187 · 10-16-2008

damn, good luck with teh turbo, if you've got the 4.0, definatley do the supporting mods as far as driveshaft, rear end...what size tires do you have?

**stlwagon** · 10-16-2008

Speed limiter is a user-adjustable option on any SCT tune.

madmailman96 · 10-16-2008

i have the 16" pirellis p-zero and there rated into like 230 mph, so i think i should be fine? was wrong about the 160mph, looks like i wasnt looking at the p-zeros

Thereaper · 10-17-2008

Quote:

Originally Posted by madmailman96

i have the 16" pirellis p-zero and there rated into like 230 mph, so i think i should be fine? was wrong about the 160mph, looks like i wasnt looking at the p-zeros

230 mph for P-Zero's sounds a little high.

**stlwagon** · 10-17-2008

A Z-rated tired is good in excess of 149 mph (240 km/hr), not 230 mph.