[EastCoastKing18]

Ive been looking around at different exhaust set-ups for my 05 4.0L V6 and came across a clip on youtube of a really nice sounding one with a GT take-off H-pipe, borla mids and stinger cat backs, and pypes headers. The links below are to what i believe are the parts used for this set-up and i was wondering if it would be a direct bolt on job or any fabrication would be needed using these parts considering most are for a GT. Thanks for any help.

05-07 MUSTANG GT 2.5" OFF ROAD H PIPE PYPES
Borla S-Type Stinger Catback (2005+ GT) at AmericanMuscle.com - Free Shipping!
Pypes Polished 304 Stainless Steel Shorty Headers (2005+ V6) at AmericanMuscle.com - Free Shipping!

[GT_921]

your going to have to get a gt rear bumper if you want duals.. if you have to do emission test i would suggest just doing a high flow system with high cats and muffler. or if you dont have to do the test get rid of your muffler.. thats what i did but i have a gt.

[stlwagon]

The V6 bumper can be cut to fit the exhaust tip.

[Mustangmo210]

Will the pypes off road h pipe fit the v6???

[EastCoastKing18]

Thanks for the replys. I do plan on either replacing the bumper or cutting the other side, what im more concerned with is will the actual piping need to be fabricated or will it all bolt up no problem. Thanks again.

[LedZepplin77]

Originally Posted by EastCoastKing18

Thanks for the replys. I do plan on either replacing the bumper or cutting the other side, what im more concerned with is will the actual piping need to be fabricated or will it all bolt up no problem. Thanks again.

I'd like to know this as well, if you get the Pypes headers and X-Pipe, if you have an 07 1/2+ you will need new hangers, but will you need mid pipes as well or is the X-Pipe all you need??