2006 Mustang v6 with problems throwing out 3 error codes please Help!

06vistastang · 02-12-2009

I just bought a 06 mustang v6 and it runs good but today the little wrench came out on the display and i noticed a little bit of power loss but the car still runs and can even go on the highway over 70mph , then later on that day the little motor light came on the display so i took it to auto zone to run the computer and it threw out three codes. p0340 cam sensor, p2135 tps, p1336 misfire. can someone please tell me how to fix these problems step by step or explain these codes to me so i can have it fixed to get my car running back to normal. Thanks for all the help guys.

Qsuzy · 02-12-2009

Don't you hate when that happens? There is nothing more frustrating than taking your car out and having problems. I don't know what your codes mean but I thought I would post a code that I am getting on my "01" just in case someone sees your post and knows codes. The code I am getting on my car is DTC - P7A00. For the past two years when I take my car out of storage, it thinks I am trying to steal it and won't start. The antitheft shuts down the fuel pump like I am using a valet key. Anyone know what that code is?

05horse · 02-12-2009

sounds like its in timeing. basicly the throttle is off, and thats causeing the cam to be off, witch is makeing your plug spark timeing off. not sure how to fix it... check ur TPS fuse

hotshot · 02-12-2009

I know that if the wrench is coming up and not the check engine light, its going to be related to the throttle body in some form. Something you could do is try to clean the throttle body. It might resolve one of the codes. It couldn't hurt

06vistastang · 02-12-2009

Anyone else have any idea?

okcreferee · 02-12-2009

If Stlwagon sees your thread he can probably help you too.Do what hotshot said about cleaning your throttle body first.Might work.

**stlwagon** · 02-12-2009

Start with cleaning the throttle body and then replace the TPS.

iceman320 · 02-13-2009

also you might try cleaning the connections to the cam sensor and the other sensors that pertain to the codes. just to make sure that you have a good connection to them. cause a bad connection can cause a bad reading to the sensors.

daniel36 · 02-14-2009

first step would be clean ur maf and then check out ur cam postion sensor could be ur timing problem..