[amustangrocks]

Originally Posted by rhbdstang

Are you sure you didnt install it upside down. It looks easy to do. The tag with the bar code should be on the drivers side. Im not sure what wheels you have but there could be an issue with clearence and the 16in stockers. I only say this because i put on 18's before this mod and also noticed that the rear sway bar only comes with the pony package with comes with 17in wheels. Good luck.

the factory tag does say left side( drivers) and the curve on the end of the bar should go forward inside the rim. with the 16 stock wheels, there is about 1to 1 1/2 inches of clearance between the bar and the rim

[Calebguthrey08]

yea i checked to make sure i didnt put it on upside down or anything but that all looks right and i got under the front and looked at the front sway bar and it is still on there as tight as it was...but i do still have the stock rims that came on it so maybe thats it cause it doesn't seem to have much clearance at all in between the bar and the rim?...idk maybe thats just a good reason to buy the new rims i've been looking at lol

[48prerunner]

they make a bracket that moves the rear sway bar for use with 15" wheels (like for drag slicks) you sure you have your bolts tight up by the top of the dog bones? mine was a little loose after first test drive and i had a clunck. I also have an extra set of sways i want to sell.

[Calebguthrey08]

i finally figured it out...the front sway bar had worked the bolts loose from the brackets so i just a lil bit of lock-tite and it's all good now thanks for all the help