Wire Looms (Seperators) to use with MSD 8.5mm Super Conductor Wire Set
Hi,
I am preparing to order a set of MSD 8.5mm plug wires for my V-6. I was hoping that someone that has these wires on their car could tell me if they were able to use the stock wire looms or if they had to order new looms to accomodate the wire size. I am not sure what the diameter of the stock plug wires is so I am not sure if I need to order looms. Any suggestions on looms for the V-6 if so? Most of the kits that I have seen seem to be for V-8 applications.
Thanks
__________________
2007 Mustang V-6 w/ Pony Package, Automatic Transmission, Performance White w/ painted Vista Blue racing stripes. Current Mods: X-Charger #78, 8.8" GT Take-off rear axle w/ 3.73 gears and T-loc, GT side rocker panels, GT rear bumper, JBA H-pipe and mid-pipes, Dual GTA cat-back mufflers, 14" shorty antenna, 3D Carbon air dam (chin spoiler).
you might be ok. i put live wires on,8.5mm+ the nylon sleves making them 10mm. i was able to squeze them into the looms, but it wasnt easy.i had to use some mini channel lockes to clip them. i wanted to run then as the stock wires were. i think it worked out ok.
__________________
goina hundred in a 55, and i dont know why..
some things were just meant to be..
05 V6 auto, torch red, basic, a few mods
06 V6 stick, vista, premium (g/f`s car)
i didnt use my stock looms, just got em situated to where they werent in the way or against anything. id like to have some though...some biggers ones so i dont have to squeeze em
__________________
2006 4.0 V6 Mustang/X Charger #128 Mods: Too many, check out my profile. Probably currently under modification...
Wire Looms (Seperators) to use with MSD 8.5mm Super Conductor Wire Set 
