If anyone has some links to a v6 with these axlebacks please post. few i have heard and watched sound really good imo! or if you have them how do you like em? thanks
sounds pretty good for a v6, more of a race-car-esque tone i guess.
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
also, they sound GREAT at startup and at idle, especially on cold starts, WOT is a blast, especially when you roll the windows down under an overpass or a tunnel, they are nice
i payed 376 bucks for my complete setup including install
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
oh yeah, another note, they seemed to have gotten deeper over the last 500-1000 miles, they really broke in nicely
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
the guy just cut my Y pipe and ran straight pipes all the way back OTA right to my violators, i am very pleased, that 376 is a TOTAL, it includes the mufflers as well as install, so i got a great deal
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
i got my mufflers from American muscle for 216 dollars with the forums discount code
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
actually 05horse cut my bumper for me, its real easy, just use a CD as your template its pretty straighforward after that.
they arent too loud from inside the car unless you open the windows. i mean, with the windows up you can tell a difference, i mean, obviously, you have violators on, but there isnt much drone, at least not compared to my pypes single axleback i had on for a while. i will post a video tommorow
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
measure on center
cut cd in half
place below the fold line on the roll pan
trace
i cut with a hole saw for drywall ( like the straight saw not the circular one )
then touched up with a dremel tool.... it turned out better than mine lol
yea my guy did his too both of ours for $160
$160 for labor, about 20 ish feet of new tube ( prolly a little less ) hangers and welding ( although silverbullet07 had his clamped ) not a bad call!
it makes me laugh to see ppl pay 5 and 6 hundred to get theirs on.
heck i was gonna do an h pipe, my install woulda only been $180 then...
__________________
i have yet to find some one else who when changing their oil ( every 2000 miles or when they get bored ) details the under side of their car.
X-C April 2010,Heads, Cam,Internals April 2011, or blown engine, witch ever comes first.
The transformation has begun!
05 v6 pypes violators 
