[sonicmustang]

Hi everyone this is my first post but i'm a long time reader. I need help. I just finish a do it yourself turbo job on my 2005 v6. I set it up for 10 lbs boost on 39 lbs injectors. The car is running too rich to drive it to a local shop to dino tune. Error codes p2196/p2198. Does anyone have a base tune for a diablo tuner. Any help would be awsome. Thanks alot.

[GrayPony]

Tunes are locked to the PCM code.... even if someone had one, they would have to have the same PCM code for you to use it.
Tow it to the dyno shop

[stlwagon]

A P2196 isn't going to hurt anything for a short trip. Just keep your foot out of it.

[sixers007h]

Just call a tow truck, it shouldn't be too expensive, and its better then hurting the car. That or call up Bama or Tillman and get up a temp. tune.

[xchris]

really? you need to know the PCM code for someone to make a tune for you? because i get e-mailed tunes and what not all the time without giving that info.

You Should buy a tuner anyways, if u get one and still dont have it dyno tuned i have a base tune for a turbo kit with the same injectors u have.

[sonicmustang]

I do have a U7140 Predator. But i don't Know how to shorten the injector pulse, or so I'v been told needs to be done. The base tune via e-mail is a good way to get it to a shop. but my local shop wont give me one. There has to be a better way then a tow truck. thanks guys

[xchris]

I have a base tune for you but i use an sct xcal3 and i dont know if ur tuner uses the same file type as the xcal3 does

[sonicmustang]

Thanks xchris, its a great offer but seems like there not compatible.

[Tillman Speed]

I do remote SCT dyno tuning for $250. Give me a call if your interested, or PM me and I'll shoot over my cell number.

Chris