[jayhawkofku]

I have a chance to buy the following parts that were taken off of a 2007 GT500 with less then 2k miles on it:

Exhaust system
Supercharger m122 blower
Intercooler
Stock Air Box
Ford racing GT 500 pulley with belt and super charger pulley
GT500 "stock driveline"

I know the exhaust system will work or from what I was told it will. But will the rest of the engine parts work -- such as the supercharger, air box, pulleys, etc? Or will it require too much money to make it all work?

Thanks guys

[05horse]

modifications required!

[ponyexpress1573]

I have a lot of GT500 parts on my car now. The rear end is a great piece and has stronger axles and bearings don't forget Carbon Fiber clutch packs. This is what I have in mine also I have wheels and tires off a new one 285's out back hook very well. My strut tower brace is a 500 unit (get it from ford for $50) of and front brakes too. I have heard if Explorer Express will sell you a lower manifold the blower can be made to work but this will need someone very familiar with superchargers not a diy kinda job. Oh and lastly yes you can fit the exhaust but you will need to clearance the rear fascia and get the left hanger bracket.

[sixers007h]

The exhaust should mount up fairly simply, the rest, not so much. It would require ALOT of custom fabrication, and it would not be cheap. I would advise against it.

[ponyexpress1573]

I would be interested in the blower package to build a setup for a F-150 if it is cheap enough it will require a lot of fabing so I wouldn't want to get in too deep in case it doesn't work.

[jayhawkofku]

Thanks for the replies guys! Sounds like it wont work without more $$ in it then I want. This site's always full of great information

[burnrubber4.0]

you will need a custom fab intake manifold to fit the s/c, and one heck of a tune. it can be done though.