[dewness]

How hard would this be to do? here is the link to the auction I am considering ROUSH MUSTANG FRONT BUMPER PACKAGE 2005 2006 2007 08 09:eBay Motors (item 180333452009 end time Jul-30-09 16:51:50 PDT)

it says it is for a GT/v6 but I did some searching on here and some think it might be pretty hard.

What do you guys think?

[stlwagon]

You would need to purchse GT fenderwell liners.

[dewness]

is that easy/not crazy expensive?

[Vlad]

Easy, yes.

Expensive, don't think so.

[MrH08]

I would personally go through roush themselves for the part or maybe a site other then ebay. The cost is the same on roush's site and they also offer them painted. At a higher cost obviously, but could save you alot of trouble vs finding a decent paint shop if you don't have one.

[dewness]

Originally Posted by MrH08

I would personally go through roush themselves for the part or maybe a site other then ebay. The cost is the same on roush's site and they also offer them painted. At a higher cost obviously, but could save you alot of trouble vs finding a decent paint shop if you don't have one.

actually, thanks for reminding me that I should actually check the site! haha sometimes I get carried away thinking just because a Power Seller with great feedback has it for sale it doesn't mean its the cheapest!

[48prerunner]

I would shop around try Stage 3 Motorsports 2005-09 Mustang GT Roush Painted Fascia Kits

if you dont know some body to paint it might be the way to go then you could just bolt on. you will also need an new grill as your v6 is not going to fit. tthe free shipping is key on these. keep that in mind when you shop. plus will run you 2 to 300 to paint as they are urethane have to add flex to paint.

[shoe48]

Dont forget to look at the Over stock stuff
ROUSH Performance Products

[BoostNStang4.0]

it really isnt hard, i did it on my v6 and nobody could tell the difference. all you need to do is to have a body shop fabricate a new fender well for both sides...matter of fact...im gonna post a pic of mines...and btw im selling mines, its in performance white if anyone's interested.

[sixers007h]

It would not be hard. You would need a gt grill and fogs (which you can find cheap on ebay) and the front piece of both the front rubber inner fender wells from a gt. I just purchased mine straight from Ford. They retail for like $37, but I was able to get mine for $30. They have to be ordered, so it will take a day of two. Be careful of the offers on ebay for this product, I found they are often not the right part. The install for a front bumper is easy. You will need to take off the wheels for the fender wells, then unscrew the bolts on the bumper, and your done. You will need to buy new rivets for the turn signals as well. You can drill through the ones on your current bumper then switch it. It shouldn't take more then a hour or two.