[OSXFreak]

So I just installed my new Screamin Demon coil, as well as new LiveWire wires.
So with this install, I noticed that the Clips that normally holds the wires to the Engine, will no longer close. It looks like the wires are a bit larger, as well they have the yellow outer cloth shell that adds to it.

So anyone have any good ideas on how to make these lay nice and neat...

Thanks

Chip

[jayberge]

Live Wire has some billet wire dividers, kinda spendy. Livewires

These are plastic on ebay, much cheaper.
BLUE Spark Plug Wire Separators - Looms - Dividers:eBay Motors (item 170256047276 end time Aug-22-09 19:31:17 PDT)

Or zip ties, really cheap.
Spark Plug Wire Dividers - DSM Forums

[OSXFreak]

Thanks for the info those blue ones are nice and would go well witht he car. I was able to get them connected up, but not liking the way they look so will get these..

Thanks

Chip

[okcreferee]

OSXFREAK,Holler at Amustangrocks.He has the coil and wires installed on his mustang and knows what to do concerning the wires to make them fit just right.

[OSXFreak]

Originally Posted by okcreferee

OSXFREAK,Holler at Amustangrocks.He has the coil and wires installed on his mustang and knows what to do concerning the wires to make them fit just right.

Thanks sent him a PM so we'll see if can figure out his trick. I did get a couple locked down... but not an easy thing to do.

Chip