did anyone here purchace the super six motorsports heads..
they seem to be a good deal...if you are up for installing them
1400$$$ish for 50 horsepower...??
I haven't seen many who have experience with these. The company seems pretty credible so I wouldn't doubt the numbers. I also might point out that you get a core charge refunded if you send yours in so they are cheaper than 1400. I think you are supposed to see even higher gains with the stage 3 and cam.
__________________
2008 v6 Pony Package. Performance mods: Aluminum Driveshaft, Screamin' Deamon Ignition Coil, Red Livewires... and an STS turbo kit with an intercooler,and water methanol injection.
5 psi~ 286rwhp, 331 rwtq
Other Mods: Window Louvers, 2 10" MA subs, 1200 watt RMS Hifonics amp. Tial 50mm BOV.
did anyone here purchace the super six motorsports heads..
they seem to be a good deal...if you are up for installing them
1400$$$ish for 50 horsepower...??
any thoughts?
im thinking of getting them
so anything will help
thanks !!
while your at it with the head change bump up the compression with diff pistons and cams that should net ya a good 100hp
i was thinking of the stage 3's and the cam set
and then in the future doing the F/I
since thats a mod that will bring alot of HP or half the price
... it would be like 3000.oo fully installed...whereas a supercharger is gonna come out to 6000.oo...
tempting isn't it? their dyno page shows a 4.0 5-speed, with dual exhaust, stage 3 cylinder heads and the regrind cams, Procharged at 14 psi putting out 440 RWHP! take that, Camaro SS
440RWHP from the six???? That'd be sweet!!!! Wonder how much the new cam would affect fuel economy. I'd love to see 400HP+, but I also drive mine everyday and I'd like it to continue to get better fuel economy than my V6 Ford Escape.
I was originally content with squeezing 350 out of it, but then decided I wanted to at least match the Camaro SS and my friends WS6 Trans Am (also 425 crank HP).
It's nice to know that the combined knowledge of everyone on this site makes it easier to find the parts to do it for a lot less $$$$$ than the engine swap I was originally planning.
so this sounds like a good idea then ...
i guess go stage 3 and do the cams since the engine will be all apart anyway...and save the supercharger for another paycheck
yea it does sound good. it all just depends. speed is money...so how fast do you really wanna go? along with the new heads and cam with some piston work, youll also need headstuds, probably a new fuel pump especially if you plan on f/i, and at very least a performance dual exhaust. not sure if a kenne bell boost a pump would do enough to solve that fuel problem you might get but it would be cheaper and easier. also if youre planning on that, youre going to want a new rear end especially above 350hp. that means an 8.8 takeoff w/ 3:73s and lsd or even a 9" if you wanna save a few lbs, youll need a programmer to tune it all and lots of dyno time. new tires every week cuz youre going to be burning through them. add in install prices for everything and it will all add up to a serious need for deep pockets. not trying to discourage you from it all, but thats y a lot of people go with a turbo or s/c because its cheap(er) and easier. good luck tho i really hope u end up with it all...thatd be sick titties
__________________
2006 4.0 V6 Mustang/X Charger #128 Mods: Too many, check out my profile. Probably currently under modification...
i have the 7.5" with an LSD
but yeah
ive seen the take off 8.8 for under a grand...
i have the GT suspension, sway bars, and the auto tranny
i was going to upgrade the rear, but i just did the gears and that was pretty costly... parts and install for the 7.5" came to almost a grand ...should have gone with the 8.8 takeoff
mmmmmm cams...................heads................SUPECH ARGERS!!! i love people who look into big power adders for our sixers instead of just bolt ons....
here's another idea...storker kit mabye?? go for a 4.5 or somethin??
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
2008 v6 Pony Package. Performance mods: Aluminum Driveshaft, Screamin' Deamon Ignition Coil, Red Livewires... and an STS turbo kit with an intercooler,and water methanol injection.
5 psi~ 286rwhp, 331 rwtq
Other Mods: Window Louvers, 2 10" MA subs, 1200 watt RMS Hifonics amp. Tial 50mm BOV.
yup, theres a guy on here that has a 4.5 stroker i beleive
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
yeah he says he has 324 hp....that's not just with the stroker kit, that's with alot of other mods, etc.
The only stroker kit I've seen is Tom Morana I think it's a 4.2 or 4.3...can't remember how much money or anything. I really want the heads and cams but I don't think I could afford it...well I could but I'd spend like a lot of money that I probably shouldn't.
__________________
07 Grabber V6 Appearance:Pony Package Mach1 look alike sorta Performance:Straight Pipes into Shelby GT500 Mufflers Future:CAI+tunes;4.10's t-lok on 7.5;MAC Longtubes;Sequentials and Quarter Louvers The Greek Definition of Happiness: The full use of your powers along the lines of excellence
yeah, ive only seen the morana 4.3 stroker kit as well, but its weird, cuz on the site you click on 4.0 stroker kits 2005+ mustang and it says 4.5 stroker kit at the top, but the product itself says its a 4.3. i always thought the 4.3 kits were for the old 3.8's
__________________
2007 Satin silver 4.0-"Sadie"- Dual Pypes Violators, JLT CAI and 93 bama race tune, motive 4.10 gears and FRPP T Lok BEST E.T.- 14.485 AT 94.1
1985 Regatta Blue 'vert 5.0 LX-"Sally" 87 5.0 motor, Holley 600 4bbl carb, edelbrock high rise intake, MSD ignition, 1.7 Roller Rockers, underdrive pulleys, A/C and smog delete,BBK O/R H-pipe, flowmaster American thunders. transformed from a 3.8 to a 5.0!
I asked supersix and the guy said they did not offer one for the v6. He said he didn't know of any others. I would like to find these kits. That would make a nice power addition to the v6.
__________________
2008 v6 Pony Package. Performance mods: Aluminum Driveshaft, Screamin' Deamon Ignition Coil, Red Livewires... and an STS turbo kit with an intercooler,and water methanol injection.
5 psi~ 286rwhp, 331 rwtq
Other Mods: Window Louvers, 2 10" MA subs, 1200 watt RMS Hifonics amp. Tial 50mm BOV.
heads for 2005 Mustang v6 4.0 
