[2006mustang4.0]

does anyone know where I can find a diagram or video reference on how to replace the battery cable assembly?

[05horse]

tools needed
8 mm wrench
13 mm wrench
10 mm ratchet
SAFTEY GLASSES


step one

unhook the battery (8 mm wrench )

step 2

unhook the ground on the passenger shock tower, then unhook the single wire next to it.

step three

from dirvers side reach behind the engine block and unbolt the negitive ground cable

step four

jack up car and unhook from starter

step five

pull harness out some tugging on the plastic retainers is required, the new harness comes with them

step six

lay new harness in. hook up the trigger wire and the POS batt cable to the solonoid lower car i belive its a 10MM

step seven

hook the negitive back up to the back of the engine i belive its a 13MM

step eight

bolt the shock tower ground in, plug single wire back in

step nine

hook up the last positive cable to the fuse box

step ten

reconnect battery and your done! took me 1/2 hour


for more detailed info click this link

http://iihs.net/fsm/?dir=366&viewfil...s-4.0LSOHC.pdf


then click 4.0L to the left

[2006mustang4.0]

Thanks for the help! much appreciated