hey guys just bought a 06 v6 4.0 mustang, it has a single muffler and I want to dual it out with flow masters, if I have this done do I have to replace the headers or can I just dual it out with out any modifacations
hey guys just bought a 06 v6 4.0 mustang, it has a single muffler and I want to dual it out with flow masters, if I have this done do I have to replace the headers or can I just dual it out with out any modifacations
You can split it at the Y with a little fabrication.
I took it to a muffler shop and he said he'll dual it out and he said he'll add another pipe next to the existing pipe, but im not sure if I'll have to mess with the headers if he does that.
I took it to a muffler shop and he said he'll dual it out and he said he'll add another pipe next to the existing pipe, but im not sure if I'll have to mess with the headers if he does that.
No he won't... Instead of both sides getting dumped into a Y and single pipe sounds like he'll just split it apart and fabricate a new midpipe.
yep any good muffler shop should be able to do it,,cost...$150- $200.
I have heard its easy to cut the stock V6 bumper to make room for the exhaust tip.some people have used a CD as a template to draw the semi circle. just measure and cut.
I was chicken and ordered the takeoff bumper
$150-200? All the shops I called said $250 for the exhaust and they wouldn't touch the bumper. I'm going to save my mooooney and cut the bumper myself, then i'll price shop to get my H-pipe and left side built.
__________________
Black 2005 Mustang v6, 5 speed, IUP, EUP and Leather.
Razzi 1/4 window scoops, Mustang GT Sway Bars, Flowmaster American Thunder Single Exhaust, Clear Front Turn Signal Lenses, Demolet CAI, X-cal2 91 tune, Hurst Comp/Plus Shifter, FRPP T-Lock, Ford 3.73 gears
I bought the bumper from Diversified. I bought the mufflers and mid pipes on e-bay. (after cat) I took it to Meineke and was told $200. I was happy since I didn't have the H or the hangers. I was quoted $37 a piece from Ford for the hangers and could never get a straight answer on the qty. (2-4) They called me an hour later and said it was more custom work than they expected and would be $280. Previously I had this done on a 99 and the cost are similar.
I bought the jba H kit... Midas installed for $75 including welding the H pipe.
__________________
Xcharger with water injection, JBA headers
JBA duals with an H pipe, Roush rear springs, Che K member brace with torque limiters, Cervini's quarter window deletes, Canton polished expansion tank, Roush scoop, Street Scene Elenor grille, custom GT500 chin spoiler, PJ rear louvers, Black rear spoiler, BSM custom stripes, Hurst shifter, Billet interior trim, custom door welts, Autometer dash pod, AEM wideband, Autometer boost & Fuel pressure gauges
Questions about Dual Mufflers 
$150-200? All the shops I called said $250 for the exhaust and they wouldn't touch the bumper. I'm going to save my mooooney and cut the bumper myself, then i'll price shop to get my H-pipe and left side built. 
