[SixBanger4.0]

Yes i Just Recently installed a C&L intake and Diablo Sport Programmer But i dident buy them together so i did not get the C&L Softwaer with it so i installed my intake and

than programed it cus the car was idle'ing at 850- so i messed with Traction IDLE rpm and thats it And got it working fine. than i seen MAF Curve AIR/FUEL Spark Advance and i dont know what those stuff are.. so i dont remember exactly what i did with that stuff but if i get a reply from this post il get everything but all i know now is when i get on 1st gear from a stand still it dont GO NO Waer and it will creep to about 3600-3800rpm, and the speed shifting begins its a diffrent car after 3800rpm but from 0-60 its about a 7.6 CAR when i clocked it befor at 6.1 ok whatever back to the point its alot faster but from a standstill its BAD so can i have anyones HELP thanks!!!

[Kyle F]

You need to contact Diablo and get the Software for you CAI if they have a specific calibration for it.

Plus, just instal their performance tune and don't mess with their tunign settings until you change somethign that needs it.

Its ok to raise your rev limiter and top speed limiter, but messing with the tune settigns when you don't know exactly what they are can be very dangerous.

[SixBanger4.0]

yea i was thinking about that oright im gonna try that thanks,

[booger]

Check to make sure you have the current firmware installed. The Predator should have several canned tunes for 4 or 5 different CAI manufacturers, C&L being one of them. Read this pdf for more info.