2002 Ford Explorer 4.0 V6 Spark Plug Type And Gap i have a 4.0 v6 its actually from a 2002 explorer but its the same compared to a 05 right? anyways i pulled a spark plug and it looked good but the gap was at .074in way too big i thought, then i looked at the spark plug number it was a motorcraft platinum AGRE 22P the sticker on the hood said the plug should be a AGSF-22PP and the gap should be at .052-.056, the car has never been touched with its all original it has 60,000miles, so is the current plug the right one and why would it be gapped at .074 from the factory, wouldnt that high gap cause the engine to run rough? the car runs good, seems to lack power though i just though it was because it was a v6, any advice would be nice
__________________ 1987 Mustang LX 5.0 5-speed,white with smoke grey interior,MAF conversion,Perfection clutch(valeo)2.5inch Ravin exhaust, subframe connectors, ported lower intake & heads 1994 F-350 dually crew cab,green on tan leather,460,C6,k&n intake,msd coil, BANKSsystem,9mm wires,bosh platinum plugs |