Discuss Sequential Turn Signal Kits? on AllFordMustangs.com, the place for Mustang enthusiasts.
Welcome to our Mustang forums where Mustangers come together to hang out, discuss and enjoy their favorite Mustang hobby with fellow Mustang enthusiasts. We invite everyone to read, post, and enjoy our Mustang forum as well as the many other sections of our site.
You are currently viewing our forums as a guest. By joining our community you gain access to post topics, communicate with members, upload your photos and access many other special features. Registration is fast, simple and free so why wait, join our Mustang community today! If you have any problems with registration or your account login, please contact support.
I purchased the prewired kit and it is real easy to install. Took about 20 minutes. The prewired kit is literally plug and play. I believe the vendor will refund $40.00 if you send back your two rear harnesses making the kit fairly reasonable. I would recommend highly as it sure gives anyone behind you a clear indication of your intentions.
I installed the pre-wired sequential turn signals a couple of weeks ago. Took about 30-40 minutes tops. Installing the 3rd brake light pulser this evening. Have had several compliments so far. Pretty neat stuff.
2005 GT, Performance White, Shaker 500, Charcoal Leather, Spoiler Delete, Sequential Tailights, Aftermarket IUP, Sirius satellite with PIE adaptor, shorty antenna, 3rd set of front suspension parts, 2nd gas tank, and no more HC trap
Somebody a few posts back asked about them, here is what I posted then. Hope it helps.
Hey, I just installed the sequential kit from webelectronics.com I bought them off their site. You may know they offer a kit for $179. which comes with a modified harness. You can send your orginal back and get a $40 refund. That means $139 but if you'll pay a few bucks to ship your harness back so assume $145 or so.
I bought the kit from them for $89. There was no shipping so just $89 total.
I had it in 2 days (He sent it Priority Mail)
This kit requires you to make a few connections.
I had it installed in 30 minutes. The instructions were so detailed since it was specifically for our car 2005 Mustang. There were no extra parts to buy. You just need some basic tools to snipe a wire , a socket wrench.
All the mods are behind a panel in the trunk. You cant see them. You basically take the black plastic cover off the inside of the trunk, reach in and unbolt the 3 nuts that hold your taillight in place. Slide out the light and remove the harness. It takes a few minutes to snip a couple wires and connect them with the leads form the module that the kit has. Then just reinstall. It seemed too easy so I went even slower thinking I was missing something and it only took a half hour or so.
I can't imagine anything really happening to ruin the vehicle or cause a service call. Unless you don't wrap a connection well and it grounds out. At that point you will just be replacing a fuse. I don't think a voided warranty would result. From what I notice on this site, there are a lot of idiot dealerships out there and pleanty of good ones too. You never can tell.
People always add to their vehicles. I guess ask yourself
If wiring a Trailer plug onto your vehicle/truck does not void a warranty, why should this???? If wiring Fog lights into your car, or wiring a new stereo or speakers...why should this?
The way I see it, I saved about $55 bucks and had it done in less then an hour. I also did the mod myself which is kind of a cool thing when somebody asked...you can at least feel good that you did some actual wiring and got your hands a tad dirty
That $55 will go towards louvers or some other mod now. $55 plus the satisfaction of tackling a project means more to me than to others. If you have the means...($$$$$$$)or are uncomfortable with basic wiring then by all means....go the easy route and get the completed harness.
Did you guys have to modify the flasher to slow it down? I had to do this on my 99. To get the lamps to fully sequence, I had to modify the electronic flasher to slow it down by changing out a capacitor.
I just received and installed a set of pre-wired sequential turn signal harnesses from WebElectric. The old ones are back in the mail....for the $40.00 rebate. The plug N play. installation only took 30 minutes and work great!
My GT is on a railcar somewhere around Kansas City but I followed one on the freeway today and the turn signals only appear to illuminate two of the three segments. Does the sequencer run all three of the segments? anyone have video?