Originally Posted by gtpuller
Converting your fog lights to turnsignals could run afoul of your states vehicle code.
Also the current draw would probably fry the flasher electronic circuits. A relay circuit to provide the power would have to be built and then make sure it doesn't feed back into the headlight circuit (Blocking diodes?). Not knowing what the foglight circuit looks like now, that could be simple or hard.
Originally to keep it simple I was going to keep the fog lamps and just add an amber LED behind the shroud and aim it at the reflector and just hard wire it into the turn signal, but I ditched the idea all together
Painting them black. I already ran into a problem with the fog lamps, I'm going to have to mount the projector to the reflector from behind to allow the lens to fit back on, then to cover the exposed projector end I'm going to use PVC pipe, the problem with this is I'm not sure if I'll have enough space behind the fog lamps