Discuss Throttle Body screws V6 what are the specs? on AllFordMustangs.com, the place for Mustang enthusiasts.
Welcome to our Mustang forums where Mustangers come together to hang out, discuss and enjoy their favorite Mustang hobby with fellow Mustang enthusiasts. We invite everyone to read, post, and enjoy our Mustang forum as well as the many other sections of our site.
You are currently viewing our forums as a guest. By joining our community you gain access to post topics, communicate with members, upload your photos and access many other special features. Registration is fast, simple and free so why wait, join our Mustang community today! If you have any problems with registration or your account login, please contact support.
Would like to get slightly longer screws for the top 2 screws as I am holding on a bracket which is approximately 1/4" thick.
Would like to know what the thickness and thread sizes are to be able to obtain similar screws. Can not find a part number for the original screws.
why not take one of the bolts you have to the hardware, or pull one out at the store if you have to drive the car and get one 1/4" longer, or 1/2" longer and you can grind it down if needed? pretty sure they are gonna be metric. i think the heads are 8mm but a 5/16 socket will remove them
05 V6 auto, "The V6inator" torch red, base, amustangrocksleather padded leather armrest, shift boot and e-brake cover
They are M6x1.0. You probably need some about 20mm in length. Any auto parts store will have them. You can always get longer than you need and grind them down as mentioned above, if it is the only choice you have. You could also add washers under the head
XCharger HiPo 2.8, JBA shorty headers, Zabteck ported & polished TB, Mac ProChamber, Flowmaster American Thunders, GT500 shocks/struts/strut mounts, GT500 front LCA's, Shaftmasters 4" aluminum d/s