[tonybello]

i recently purchased this sway bar from newtakeoff and im trying to figure out what im missing. if someone can point me in the right direction to get anything missing from the sway bar kit. thanks in advance

[s197inthe208]

Here's my thread when I went through all the nitty gritty and got the bolt specs off the Ford Dealerships computer
http://www.allfordmustangs.com/forum...need-them.html

Hope that helps

[amustangrocks]

you shouldnt need any brackets, just bolts and nuts for the rear. you use your brackets off the frt. those bars will make a huge improvement

maybe they didnt give you the brackets for the rear? just the rubber bushings? they sent them with it when i bought both sets of mine. so i take it back, you may need those

[az.dsrt]

Just don't install the rear bar upside down like it did, it's easy to do -

http://www.allfordmustangs.com/forum...side-down.html

Also from your pic, you don't have the rear brackets (that attach to the shock absorber plate). I bought mine off the Internet for $10 each and bought the bolts at Ace hardware.

http://www.allfordmustangs.com/forum...stalltion.html

[wnewport]

Originally Posted by az.dsrt

Just don't install the rear bar upside down like it did, it's easy to do -

http://www.allfordmustangs.com/forum...side-down.html

Also from your pic, you don't have the rear brackets (that attach to the shock absorber plate). I bought mine off the Internet for $10 each and bought the bolts at Ace hardware.

http://www.allfordmustangs.com/forum...stalltion.html

Also it looks like you need the bolts/ nuts that attach the links to the body for the rear bar.